536236
50
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
RQT5518
50
Troubleshooting guide
Before requesting service for this unit, check the chart below for a
possible cause of the problem you are experiencing. Some simple
checks or a minor adjustment on your part may eliminate the
problem and restore proper operation.
If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, refer to
the directory of Authorized Service Centers (enclosed with this
unit) to locate a convenient service center, or consult your dealer
for instructions.
Problem Probable cause(s)
Sound is not heard from
the center, surround or
subwoofer speakers.
The presence setting of the speaker has
been incorrectly set to “NONE” or “NO”.
While enjoying the surround sounds
¡Set the type and presence setting of each
speaker correctly.
Hiss is heard during
stereo broadcasts, but not
during monaural ones.
Excessive noise in both
stereo and monaural
broadcasts.
“STEREO” and “TUNED”
indicators flicker.
Stereo broadcasts highly
distorted.
Modulation for the two types is different so
some noise may be heard during stereo
broadcasts.
Antenna location and direction poor.
Station is distant.
Antenna location and direction poor.
Station is distant.
Building or mountain nearby.
¡Reduce the treble.
¡Change the location and direction of the
antenna.
¡Use an outdoor antenna.
¡Use an antenna with more elements.
25
12, 13
13
¡Change the location and direction of the
antenna.
¡Use an outdoor antenna.
¡Use an antenna with more elements.
Unusual “beat”sound is
heard.
Low-pitched “hum” is
heard when a station is
tuned.
A continuous or
intermittent hiss is heard.
A television is on nearby.
Adjacent signal is interfering.
AC mains lead is near the antenna wires.
Electronic interference from the AC mains
lead is fed to the speakers.
Interference from other appliances.
¡Separate the two or turn the television off.
¡Reduce the treble.
¡Separate the AC mains lead from the
wires.
¡Use an outdoor antenna.
¡Separate this unit from such appliances.
While listening to AM broadcasts
While listening to FM broadcasts
¡Select “VGCA ON”.
¡Select “VGCA ON”.
The DSP sound mode has been incorrectly
set to “STEREO”.
¡Set to SURROUND mode.
SURROUND and SFC
cannot be selected.
VGCA is ON. ¡Select “VGCA OFF”.
Page(s)
27
12, 13
13
25
27
13
17, 18
22
27
Cannot play Dolby Digital
or DTS sources.
The PCM FIX mode may be on.
An SFC mode is on.
SPEAKERS B is on. ¡Turn SPEAKERS B off. 22
¡Turn PCM FIX mode off.
¡Switch to SURROUND or STEREO mode.
21
20
The DTS FIX mode may be on. ¡Turn DTS FIX mode off. 21
An AM broadcast station
cannot be picked up clearly.
Frequency step is set to 10 kHz. ¡Hold down [BAND] for about 3 seconds.
This changes the frequency step to 9 kHz.
28
Suggested remedy
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technics SA-DA10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technics SA-DA10 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Technics SA-DA10

Technics SA-DA10 Gebruiksaanwijzing - English - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info