592593
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
O
TASCAM IF-FW/DM Owner's Manual 5
Installation
1. Connect one end of the provided FireWire
cable to the IF-FW/DM and the other
end to an available FireWire port on your
computer. An inferior FireWire cable can
negatively affect the performance of the
system.
For Windows installations, do not
make this connection until instructed to
do so by the driver installer.
2. Making the following MIDI connections
is only necessary for IF-FW/DM use with
the DM-24 mixer. The DM-3200’s USB
connection provides MIDI communica-
tion for DAW control and MTC.
a. Connect the MIDI Input of the IF-FW/
DM to the MIDI Output of the mixer if
you plan to use the IF-FW/DM’s MIDI
In port to get control surface messages
to a DAW.
b. Connect the MIDI Output of the IF-FW/
DM to the MIDI Input of the mixer if
you plan to drive the mixers automa-
tion from MTC provided by the DAW
or if you require time code display from
the DAW in the mixers readout from
the IF-FW/DM’s MIDI Out port.
If you will not be using MIDI com-
munication between the mixer and the
DAW for surface control or time code,
the IF-FW/DM’s MIDI port may be
used as an additional MIDI port by the
DAW’s sequencer. It can be used to
connect a MIDI controller, sound mod-
ule or sampler.
NOTE
The IF-FW/DM must be connected by itself
on a FireWire bus. More than one FireWire
connector on a computer does not mean
each connector has its own bus. More
often, all connectors go to the same bus
on the computer. If you require additional
FireWire devices, it is necessary to add a
FireWire card, thus adding a separate bus,
for those devices.
The maximum FireWire cable length is 3
meters.
Making Connections
Configuring the Computer
The IF-FW/DM uses the FireWire audio/
MIDI services provided by OSX, so it is not
necessary to install drivers. You must have
OSX 10.3.5 or higher installed on your Mac
to use the IF-FW/DM. Previous operating
systems do not include the correct built-in
services.
1. Make the connections as described above.
2. Power up the Mac
3. Power up the mixer
4. Open Audio/MIDI set and verify that the
IF-FW/DM device is present
5. Configure your DAW to use the IF-FW/
DM Core Audio device according to the
instructions for your application.
Macintosh
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam if-fw dm FIRE WIRE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam if-fw dm FIRE WIRE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info