617923
99
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
99
Others
Troubleshooting
Problem Symptom Action Reference
Page
Power does not turn on The "HELLO" message remains
displayed, and the unit does not start
up.
Press the [RESET] button on the front
panel.
If it does not start up, stop using this unit,
unplug the plug from the power point, and
bring it to the dealer or "Service Center".
(
A
page 13)
"FAN LOCKED" is
displayed on the display
window of this unit
The cooling fan motor is not working. The cooling fan motor is spoiled. Remove
the power plug from the power point, and
consult the dealer from which this product
is purchased, or any nearby TASCAM
Servicing Center.
-
Power turns off
automatically
The “AUTO POWER (OFF)” setting is
set to “2 HOURS” or “6 HOURS”.
Change the “AUTO POWER (OFF)” setting
of “SETUP” to “OFF”.
(
A
page 75)
The temperature of this unit has rose,
and operation has ceased for safety
purposes.
Place this unit in an area with ventilation
if possible, and wait approximately 30
minutes for it to cool down.
-
The power turns on
automatically
The “HDMI-CEC” setting is set to “ON”. Change the “HDMI-CEC” setting of
“CONNECTION” to “OFF”.
(
A
page 81)
Input cannot be
switched
i.LINK connection is currently being
established.
Cancel importing, or wait until the
connection ends.
(
A
page 37)
There are no video
images on the monitor
Monitor only supports RGB input. Set “HDMI --> DVI COLOR” in the setting
menu to “RGB FIX”.
(
A
page 81)
"HDCP ERROR" is displayed. Use a monitor that supports HDCP. -
Video images may be distorted during
reencoding/dubbing when the monitor
(TV) is connected to this unit using
a HDMI cable, or when the screen
resolution is set to “1080p”.
This is not a malfunction. Change the
“HDMI OUTPUT RESOLUTION” to a value
other than “1080p” (e.g., 1080i) if you nd it
annoying.
(
A
page 80)
Screen is distorted Video images may be distorted during
reencoding/dubbing when the monitor
(TV) is connected to this unit using
a HDMI cable, or when the screen
resolution is set to “1080p”.
This is not a malfunction. Change the
“HDMI OUTPUT RESOLUTION” to a value
other than “1080p” (e.g., 1080i) if you nd it
annoying.
(
A
page 24)
There is no audio sound The “HDMI AUDIO OUTPUT” setting
is set to “OFF”.
Change the “HDMI AUDIO OUTPUT”
setting of “CONNECTION” to “ON”.
(
A
page 81)
The amplier does not support
“BITSTREAM” output.
Use an amplier that supports bitstream
output.
(
A
page 78)
Dubbing cannot be
performed
The title to be dubbed is copyright
protected.
Titles that are copyright-protected cannot
be dubbed. Select a title that is not
copyright-protected.
(
A
page 23)
A nalized disc has been inserted. Insert a disc that has not been nalized. -
The disc is not formatted. Format the disc. (
A
page 25)
The SD card is write-protected. Remove the SD card and remove the write
protect lock.
(
A
page 27)
High-speed dubbing
cannot be performed for
EP mode titles
Dubbing cannot be performed
and “SOME TITLES CANNOT BE
DUBBED” is displayed when trying
to perform high-speed dubbing of a
EP mode title to a DVD-VIDEO mode
disc.
Set “HIGH-SPEED DUBBING” in the
settings menu to “4:3” before recording or
importing in the EP mode.
(
A
page 24)
(
A
page 77)
99

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tascam BD-R2000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tascam BD-R2000 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info