68099
16
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
SPEAKER 6-8OHM
R
L
FM
75W
FM
75W
AM
LOOP
CLASS 1 LASER PROCUCT
TAPE IN
DVD INAUX1IN
ON
POWER
OFF
ANTENNA
AUDIO
Model: MCS-600
Power rating: AC 220V - 240V~50Hz
Max Power Consumption:120W
220-240V
~50Hz
SUB
LINE OUT
REC OUT
LEFTRIGHT
USING THE RADIO
16
Connecting an antenna
Before you can start listening to radio stations, you must
connect an antenna to the MCS-600.
The receiver is able to receive both FM and AM radio. It is
therefore possible to connect both an AM and a FM antenna
to the receiver.
1. FM antenna input. Connect the included FM antenna whip
to this input. Adjust the position of the antenna whip until
optimum reception is achieved. If an satisfying signal
cannot be received with the included antenna whip, an
external FM antenna must be connected instead. Make
sure the cable used for this is 75 ohms coaxial antenna
cable. The input can also be used for connection to an
antenna cable network if available.
2. AM antenna input. Connect the included AM loop antenna
to this input. Move the antenna until optimum reception is
achieved.
1
2
Note:
It is strongly recommended to use outdoor external antenna to
acheive the optimum antenna signal.
Tuning in channels
To tune in channels on the MCS-600, you have three options:
- APS (Auto Program Scan)
- Automatic frequency search
- Manual frequency search
Press the APS button on the remote. The receiver will
automatically search the entire band for channels, and
store them as they come. This is the easiest way to tune in
radio channels. The downside to this is that the channels
will be stored in the order they have been found in.
Press the AUTO button on the remote. The diplay will show
the test AUTO. Press and hold the TUNING + or TUNING -
button on the remote for 1 second. The receiver will
automatically scan the frequency up or down, until a radio
station is found. You can also turn the TUNING knob on the
front panel of the receiver to scan up or down in frequency.
APS (Auto Program Scan)
Automatic frequency search
Manual frequency search
To search manually in the frequencies, press the the AUTO
button on the remote. The display will then show the text
MANUAL. Then press the TUNING +/- button on the
remote to step up or down in frequency. If you press and
hold the TUNING +/- button on the remote, the receiver will
keep stepping up or down in frequency, until you let go of
the button. You can also turn the TUNING button on the
front panel of the receiver to manually tune up or down in
frequency.
To store a frequency to a preset after automatic or manual
searching, press the MEM button on the remote once. The
text TUNED will start to flash in the display. Then press the
TUNING +/- button to choose the preset number you whish to
store the frequency to. Finally press the MEM button once
again. The frequency has now been stored to a preset after
your choice.
Use the STATION + and STATION - buttons on the remote to
change between the stored stations.
If your antenna signal is too weak, you might experience some
noise when listening to radio in stereo. You can some times
remove this noise by switching to mono. This is done by
pressing the ST/MO button on the remote.
APS
AUTO
TUNING +
POWER
MCS-600
VOLUME
0
1
2
34
5
6
78
9
10+
TUNINGTUNING
STATION
STATION
CD
TUNER
AUX1
AUX2
DVD
TAPE
LINE IN
ST/MO
PTY
SEARCH
APSMEMAUTO
BASS TREBLE BALANCE
REPEATDISPLAYLOUDNESS
MUTE
TUNING -
ST/MO
AUTO
STATION +
STATION -
16

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Tangent-MCS-600

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tangent MCS-600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tangent MCS-600 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info