664644
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
http://tplinkmodem.net
admin
admin
Login
For technical support and other information, please visit
http://www.tp-link.com/support, or simply scan the QR code.
VDSL LAN4/WAN LAN3 LAN2 LAN1 USB WiFi ON/OFF POWER
WPS/
RESET
Configuring the Modem Router
Wired
Wireless
Note: If the login page does not appear, please refer to FAQ > Q1.
Ethernet cable
ADSL
LAN4/WAN LAN3 LAN2 LAN1 USB WiFi ON/OFF POWER
WPS/
RESET
Connect a computer to the modem router and the LAN LED lights up.
Q1. What can I do if the login page does not appear?
A1. Make sure the computer is connected to the modem router properly.
A2. If the computer is set to a static or xed IP address, change it to obtain an IP
address automatically from the modem router.
A3. Verify http://tplinkmodem.net or 192.168.1.1 is correctly entered in the web
browser and press Enter.
A4. Use another web browser and try again.
A5. Reboot your modem router and try again.
A6. Disable and enable the active network adapter.
Q2. What can I do if I cannot access the internet?
A1. Make sure the telephone and Ethernet cables are plugged in correctly.
A2. Try to log in to the web management page of the modem router using the
default address at http://tplinkmodem.net or 192.168.1.1. If you can, try the
following answers. If you cannot, change your computer to obtain an IP
address automatically from the modem router.
A3. Ask your internet service provider for the VPI/VCI (or VLAN ID), Connection
Type, internet service username and password, and make sure all are correctly
entered into your router's management page.
A4. Restore the modem router to its factory default settings and recongure the
modem router by following the instructions in this Quick Installation Guide.
A5. Please contact our Technical Support if the problem persists.
Q3. How do I restore the modem router to its factory default
settings?
A1. With the modem router powered on,
press and hold down the WPS/RESET
button on the rear panel of the modem
router for more than 5 seconds until all
LEDs turn on momentarily, then release
the button.
A2. Log in to the web management page of the modem router, and go to System
Tools > Factory Defaults, click Restore and wait until the reset process is
complete.
Q4. What can I do if I forget my password?
Web management page password:
Refer to FAQ > Q3 to reset the modem router, and then use admin (all
lowercase) for both username and password to log in.
Wireless network password:
A1. The default Wireless Password/PIN is printed on the product label of the
modem router.
A2. If the default wireless password has been changed, log in to the modem
router's web management page and go to Wireless > Wireless Security to
retrieve or reset your wireless network password.
Q5. What can I do if the DSL LED does not turn solid on?
A1. Check your cables and make sure they are all plugged in correctly, including
the telephone lines and power adapter.
A2. Restore your modem router to its factory default settings.
A3. Remove the DSL splitter, directly connect the modem router to the phone jack
and then recongure the modem router by following the instructions in this
Quick Installation Guide.
A4. Contact your ISP to verify if the DSL line is in good status.
A5. If you have tried all the suggestions above and the problem persists, contact
our Technical Support.
a. Find the SSID (network name) and
Wireless Password printed on the
product label at the bottom of the
modem router.
b. Click the network icon of your computer or go to Wi-Fi Setting of your
smart device, then select the SSID to join the network.
OR
Computer
Connections are available
Wireless Network Connection
Connect automatically Connect
TP-LINK_XXXX
Smart Device
Wi-Fi
Wi-Fi
TP-LINK_XXXX
CHOOSE A NETWORK...
Other...
< Settings
Click Next to start Quick Setup and follow the step-by-step instructions
to complete the initial configuration.
B
A
Note: For advanced settings, please refer to the User Guide on our ocial website at
www.tp-link.com.
LED Indicators
LED Status Indication
(WPS)
(LAN1-4)
(Wi-Fi)
(DSL)
(Internet)
(Power)
On
Flashing
O
On
Flashing
O
On
O
On
O
On/O
Flashing
On
Flashing
O
On
O
The system has started up successfully.
The system is starting up or rmware is being upgraded. Do not
disconnect or power o your modem router.
Power is o.
DSL synchronization is complete.
DSL synchronization is in progress.
DSL synchronization failed.
The modem router is connected to the internet.
There is no internet connection or the modem router is operating
in Bridge mode.
The wireless function is enabled.
The wireless function is disabled.
This light remains on for 5 minutes when a WPS connection is
established, then turns o.
WPS connection is in progress. This may take up to 2 minutes.
The inserted USB device is ready to use.
A USB device is being identied.
No device is plugged into the USB port.
The LAN port is connected to a powered-on device.
The LAN port is not connected to a powered-on device.
FAQ (Frequently Asked Questions)
7106507463 REV2.2.0
©2017 TP-Link
Connecting your computer to the modem router (Wired or
Wireless).
Enter http://tplinkmodem.net or 192.168.1.1 in the address bar of a web
browser. Use admin for both username and password, and then click
Login.
WPS/RESET Button
Press & Hold for more than 5 seconds
(USB)
VDSL
LAN4/WAN LAN3 LAN2 LAN1 USB WiFi ON/OFF POWER
WPS/
RESET
You'll usually need an internet service username and password, given to
you by your internet service provider (ISP) when you first signed up with
them. If you are unsure, please check with your ISP.
4. Go to Operation Mode page and select Wireless Router Mode, then go to
Network> WAN Settings to nish the set up.
If you already have a modem or your internet comes directly from an Ethernet
wall outlet, you can switch to Wireless Router mode. Follow the steps below to
set up.
Already have a modem?
1. Connect the hardware and wait until the Power LED becomes stable.
2. Connect your device to the router via an Ethernet cable or wirelessly.
SSID (network name) and wireless password are printed on the product label at the bottom of
the modem router.
http://tplinkmodem.net
Note: If the login page does not appear, please refer to FAQ > Q1.
3. Enter http://tplinkmodem.net or 192.168.1.1 in the address bar of a web
browser. Use admin for both username and password, and then click Login.
Power Adapter
Ethernet Cable
Modem
Modem Router
Now you can enjoy the internet.
Configure the router using a web browser
3.
2.
1. Before You Start
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TP-LINK TD-W9970 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TP-LINK TD-W9970 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van TP-LINK TD-W9970

TP-LINK TD-W9970 Gebruiksaanwijzing - English - 120 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info