772849
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
The extender can be used as a wireless adapter to connect any Ethernet-only device (such
as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi network.
First, connect the extender to your router using Option ONE or Option TWO, then connect the
extender to your Ethernet-only device via an Ethernet cable.
Entertainment Adapter
Tether app provides a simple, intuitive way to access, manage your extender using
your iOS or Android devices.
1. Scan the QR code or search the keywords “TP-LINK Tether” to
download the app from the App Store or Play Store.
2. Ensure your smart device is wirelessly connected to the extender.
3. Launch the app and start managing your extended network.
Block network access
from specific devices
Turn off the LEDs
at a specific time
Change the basic
extended network settings
Do initial configuration
of your extender
TP-LINK Tether App
Tether
How to
begin?
Using WPS (Wi-Fi Protected Setup)
Please use Option ONE if your router does not support WPS.
Option TWO
Plug the extender into an electrical outlet about halfway
between your router(Host Network) and the Wi-Fi dead
zone.
Wait until the LED is lit and solid blue. If not, relocate it
closer to the router to achieve a good (or better) signal
quality.
1
2
Ideal extender Placement
Host Network Extended Network
Red
Too far away
Blue
Ideal location
Smart TV
Game Console
Desktop
Both extended networks share the same SSID (network name) and password as your host network.
Enjoy!
Plug the extender into an electrical outlet
near your router, and wait until the POWER
LED is lit and solid blue.
Power On Connect
Relocate
A1. Make sure your computer is connected to the Extended network SSID or connect your
computer to the extender using an Ethernet cable.
A2. Change the computer’s fixed IP address to “Obtain an IP Address Automatically”.
A3. Verify that http://tplinkrepeater.net is correctly entered in the web browser and press Enter.
Q3. What should I do if the LED does not change to solid after completing
Option ONE?
Frequently Asked Questions (FAQ)
Q4. How do I restore the extender to its factory default settings?
A. While the extender is powered on, press and hold the Reset button until all the LEDs turn on
momentarily.
Q2. What should I do when the LED is on, but only one band is connected?
A. It depends on your router capabilities. If you are connecting to a dual-band router, but only
or LED is on, press the WPS button on the router and on the extender again to reconnect the
other band.
A1. You may have entered the incorrect Wi-Fi password of your host network during the
configuration. Please log into the extender's web-based interface to check the password and try
again.
A2. Please reset the extender and go through the configuration again.
Q1. What do I do if I cannot access the extender’s web-based interface ?
Press the WPS button on your router, and then press the button on the extender.
1
The LED should change
from blinking to a solid state,
indicating a successful WPS
connection.
If not, please use Option ONE.
WPS
Press
2If you are connecting the extender to a dual-band router but only or
LED is on, repeat step 1 again to connect the other band.
For more information about using WPS on your router, please refer to the router manufacturer's user guide.
Some ISP gateways disable the WPS function by default, if the WPS method fails, please use Option ONE.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TP-LINK RE400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TP-LINK RE400 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van TP-LINK RE400

TP-LINK RE400 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info