664743
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Using WPS is an easier way to extend your host network. You are recommended to use this method if your host
router has the WPS button. The button might look like one of these: . If not, please refer to Method ONE.
WPS
Q3. What should I do if the LED does not change to solid after completing
Method ONE?
· You may have entered the incorrect Wi-Fi password of your host network during the configuration. Please
log into the extender's web-based interface to check the password and try again.
· Reset the extender and go through the configuration again.
Q4. I have enabled a wireless MAC filter, wireless access control, or access
control list (ACL) on my host router. What should I do before configuring and
using the extender?
·
If you have enabled those functions of your host router, you may need to disable them first. And
then follow Method ONE or Method TWO to complete the configuration.
For details, please refer to the Troubleshooting of the User Guide on the support page at
www.tp-link.com.
The extender can be used as a wireless adapter to connect any Ethernet-only device
(such as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi network.
First, connect the extender to your router referring to Method ONE or Method TWO,
then connect the extender to your Ethernet-only device via an Ethernet cable.
Entertainment Adapter
TP-LINK Tether app provides a simple, intuitive way to access, manage your extender
using your iOS or Android devices.
1. Scan the QR code or search the keywords “TP-LINK Tether” to
download the app from the App Store or Play Store.
2. Ensure your smart device is wirelessly connected to the extender.
3. Launch the app and start managing your extended network.
Block network access
from specific devices
Turn off LEDs
at a specific time
Change the basic
extended network settings
Do initial configuration
of your extender
TP-LINK Tether App
Tether
How to
begin?
Using WPS (Wi-Fi Protected Setup)
Method TWO
Smart TV
Game Console
Desktop
Router
Both extended networks share the same SSIDs (network names) and passwords as those of your host networks.
Enjoy!
Plug the extender into an electrical outlet
near your router.
Power On
Connect
Relocate
Q1. Why doesn’t the login page appear after entering http://tplinkrepeater.net?
· If your computer is wirelessly connected, please verify that you have connected to
the extender’s
SSID
. If your computer is connected via an Ethernet cable, please verify that the connection is stable.
· Make sure your computer is set to obtain an IP address automatically.
· Use the IP address to log in to the page. The default IP is 192.168.0.254. If the extender is connected
to the host router, please go to the router’s DHCP client list to obtain the extender’s current IP address.
· Please reset the extender and try again.
If the problem still exists, please refer to the FAQs (NO.931&NO.504) at www.tp-link.com for detailed
instructions.
Q2. How do I restore the extender to its factory default settings?
· While the extender is powered on, press and hold the Reset button until all the LEDs turn on
momentarily.
Frequently Asked Questions (FAQ)
Press the WPS button on your router, and then press the button on the extender.
1
WPS
Press
2
If you are connecting the extender to a dual-band router but only or
LED is on, repeat step 1 again to connect the other band.
1. Some ISP gateways disable the WPS function by default. If the WPS connection fails, please use Method ONE.
2. For more information about using WPS on your router, please refer to the router manufacturer's user guide.
Wait until the Power LED
changes to solid blue.
Red
Too far away
Blue
Ideal location
Extended NetworkHost Network
Host Router Extender
Clients
The LED should change
from blinking to a solid state,
indicating a successful WPS
connection.
If not, please use Method ONE.
Plug the extender into an electrical outlet between your router
(Host Network) and the Wi-Fi “dead” zone. The location you
choose must be within the range of your existing host network.
Wait until the LED is lit and solid blue. If not, relocate it closer
to the router to achieve a good (or better) signal quality.
1
2
Note: The AP mode of the extender is not supported by Tether.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TP-LINK RE350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TP-LINK RE350 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van TP-LINK RE350

TP-LINK RE350 Gebruiksaanwijzing - English - 41 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info