829105
9
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
Projection Clock will be finally positioned (see notes on “Positioningand “Checking for 433 MHz
Reception”).
4. If after 10 minutes the DCF time has not been received, manually enter the time. The clock will
automatically attempt each hour to receive the DCF time. When this is successful, the received time will
override the manually set time. The date is also updated with the received time (Please refer also to notes
onDCF-77 Radio Controlled TimeandManual Time Setting”).
Your Projection Clock is now operational!
Note:
If the batteries are used as the main power source:
1. Projected image brightness, alarm volume and back-light strength would be weaker.
2. Battery life time would be much less than 1 year.
TO USE THE PROJECTOR POWER ADAPTER
The unit comes with an AC-DC adapter for using the projector for an extended period of time, such as
throughout the night.
To connect the AC-DC adapter:
Important!
Make sure that your household voltage is 230V! Otherwise it can result in damaging your
Projection Clock.
1. Insert the 2 x AAA, IEC LR3, 1.5V batteries into the transmitter (See To install and replace batteries in
the Temperature Transmitter” above).
2. Within 3 minutes, connect the AC-DC adapter to a wall socket. Plug the adapter into the jack at the
bottom of the Projection Clock. All the segments of the LCD and the projection will light up briefly; and a
“beep” will sound. Then the time as 0:00, the indoor temperature, and the outdoor temperature as - -.- °C
will be displayed.
3. The Projection Clock will now start receiving outdoor temperature signal. Once the remote temperature
has been received and is displayed on the Projection Clock, the DCF-77 time code reception is
automatically started. This takes typically between 3 - 5 minutes in good conditions. This time period is an
excellent opportunity to locate the transmitter in suitable location. In order to ensure sufficient 433 MHz
transmission however, this should, under good conditions be no more than 20 - 25 meters from where the
Projection Clock will be finally positioned (see notes on “Positioningand “Checking for 433 MHz
Reception”).
4. If after 10 minutes the DCF time has not been received, manually enter the time. The clock will
automatically attempt each hour to receive the DCF time. When this is successful, the received time will
override the manually set time. The date is also updated with the received time (Please refer also to notes
onDCF-77 Radio Controlled TimeandManual Time Setting”).
Your Projection Clock is now operational!
Note:
If the Projection Clock is powered through the AC-DC adapter, the projection will be constantly ON at the
highest brightness level unless the brightness level is manually changed to a lower brightness level afterward.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TFA 98.1011 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TFA 98.1011 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van TFA 98.1011

TFA 98.1011 Gebruiksaanwijzing - Nederlands - 11 pagina's

TFA 98.1011 Gebruiksaanwijzing - Deutsch - 12 pagina's

TFA 98.1011 Gebruiksaanwijzing - Français - 11 pagina's

TFA 98.1011 Gebruiksaanwijzing - Italiano - 13 pagina's

TFA 98.1011 Gebruiksaanwijzing - Espanõl - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info