466141
3
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
20
batteries in the Weather Station above). Once the batteries are in
place, all segments of the LCD will light up briefly and a short signal
tone will sound. Following the indoor temperature/humidity and the
time as 0:00 will be displayed. If these information are not displayed
on the LCD after 60 seconds, remove the batteries and wait for at
least 60 seconds before reinserting them. Once the indoor data is
displayed user may proceed to the next step.
3. After the batteries are inserted, the Weather station will start
receiving data signal from the transmitter. The outdoor temperature
data should then be displayed on the Weather station. If this does
not happen after 2 minutes, the batteries will need to be removed
from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, the
distance between the Weather Station and the transmitter should
not be more than 100 meters (see notes on “Positioning” and “868
MHz Reception”).
Note:
In the event of changing batteries of the units, ensure the batteries do not
spring free from the contacts. Always wait at least 1 minute after removing
the batteries before reinserting, otherwise start up and transmission
problems may occur.
WHEN MORE THAN ONE TRANSMITTER IS USED
1. User shall remove all the batteries from the Weather Station and
transmitters, and wait 60 seconds.
2. Insert the batteries in the first transmitter.
3. Within 2 minutes of powering up the first transmitter, insert the
batteries in the Weather Station. Once the batteries are in place, all
segments of the LCD will light up briefly and a short signal tine will
sound. Following the indoor temperature/humidity and the time as
0:00 will be displayed. If these information are not displayed on the
LCD after 60 seconds, remove the batteries from both units and wait
for at least 60 seconds before reinserting them.
4. The outdoor temperature data from the first transmitter (channel 1)
should then be displayed on the Weather Station. Also, the signal
reception icon will be displayed. If this does not happen after 2
minutes, the batteries will need to be removed from both units and
reset from step 1.
5. Insert the batteries in the second transmitter as soon as the outdoor
temperature readings from the first transmitter are displayed on the
Weather Station.
Note :
User shall insert the batteries into the second transmitter
within 45 seconds after the Weather Station displays the information
of the first transmitter.
6. The outdoor temperature from the second transmitter and the
"channel 2" icon should then be displayed on the Weather Station. If
this does not happen after 2 minutes, the batteries will need to be
removed from all the units and reset from step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2"
icon and outdoor data are displayed on the Weather Station. Then
within 2 minutes, the channel 3 outdoor data from the third
transmitter will be displayed and the channel icon will shift back to
"1" once the third transmitter is successfully received. If this is not
happen, user shall restart the setting up from step 1.
Note :
User shall insert the batteries into the third transmitter within
45 seconds after the Weather Station displays the information of the
first transmitter. Or immediately after reception of the second
transmitter is finished.
8. In order to ensure sufficient 868 MHz transmission however, the
distance between the Weather Station and the transmitter should
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

TFA-35.1044.55.IT---Linear-Funk

Zoeken resetten

  • Beste lezer, sinds een aantal dagen geeft mijn weerstation geen buitentemperatuur meer aan, heb de batterijen verwisseld zoals het moet. Maar temp. is van buiten niet meer zichtbaar.
    Betreft een TFA Dorstmann/Wertheim type 35.1044.55.IT. Wie heeft voor mij de oplossing. Gesteld op 4-5-2017 om 08:46

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw TFA 35.1044.55.IT - Linear Funk bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van TFA 35.1044.55.IT - Linear Funk in de taal/talen: Engels als bijlage per email.

De handleiding is 1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van TFA 35.1044.55.IT - Linear Funk

TFA 35.1044.55.IT - Linear Funk Gebruiksaanwijzing - Nederlands - 15 pagina's

TFA 35.1044.55.IT - Linear Funk Gebruiksaanwijzing - Deutsch - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info