468129
6
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
ENGLISH USER MANUAL
SYN 7/87 CDX-2
19. PITCH RANGE % Button: Every time you press this button, you will change the scale
of the speed slider. On normal audio CDs you can select +/-4%, +/-8%, +/-16% and
+/-100%. The +/-100% option is not available on MP3 CDs.
20. PITCH LOCK Button: (Master tempo) activates the Pitch Lock function. This function
allows you to make adjustments to a tracks speed using the pitch control without
altering its tonal pitch. This button turns blue when the Pitch Lock is on.
21. SPEED button: This button is used to turn the speed function on and off.
22. RELAY button: When you switch the Relay function on, alternately a track will be
played from both CDs until the relay function is disengaged. You can always put a
new CD in the player that is waiting in standby mode. In this way you can create an
endless program. Perfect for use in pubs etc.
23. MEMO Button: is used to store cue points and loops to the Hot Cue buttons. Press
this button before one of the HOT CUE buttons to memorize a cue point or loop. Press
this button together with the SAVE TRACK button to enter delete mode”. Check the
next chapter for more information on how to use this button.
24. SAVE TRACK button: Used to save the contents of the 4 HOT CUE buttons to
permanent cue memory. Press this button together with the MEMO button to enter
“delete mode”.
25 26
25. FADER START Sockets: If you are using a mixer with fader start function, connect
the player with the fader start of the mixer. Please note that these sockets must never
be connected with any voltage.
Attention: This remote control is only compatible with certain (Syn orPioneer® compatible) mixers.
26. CONTROL CONNECTOR: Connect the main unit here, using the supplied mini-DIN
cable.
VFD DISPLAY:
12 13 14 15 16 17 18
8
9
11
10
1 2 4 7653
1. PLAY: appears while the unit is playing a CD.
2. PAUSE: appears while the player is in pause or cue mode.
3. CUE: appears when the master cue point is programmed.
ENGLISH USER MANUAL
SYN 8/87 CDX-2
4. ELAPSED, TOTAL REMAIN: indicates that the time shown on the display is the track
elapsed, remaining or total remaining time.
5. ALPHANUMERIC DISPLAY: Shows the names of folders and MP3 tracks. For MP3
tracks recorded in CBR also the bit rate is shown. For VBR recorded MP3 tracks the
display only shows “VBR”. For Audio CD’s CD-TEXT information will be shown when
it’s available on the CD, otherwise the display shows “no CD-TEXT”. All kinds of other
interactive information is also shown.
6. TIME BAR: has 2 functions:
During normal playback: shows either time remaining or elapsed depending on
the setting of the TIME button. Starts flashing at the end of each track to alert the
user to take action.
During loop playback: shows the time remaining until the end of the loop. This
visual aid helps you to see where and when the seamless loop starts again.
7. BPM DISPLAY: the automatic beat counter shows the number of Beats Per Minute on
the display. In manual mode the display shows “BPM”. In automatic mode the display
shows “AUTOBPM”. (press the TAP button for 2seconds to switch to automatic mode)
8. CD/MP3 indicator: shows “CD” when a normal audio CD is playing, shows “MP3”
when an MP3 CD is playing.
9. AUTO CUE: appears when the “auto cue function is active. See SGL/CTN button.
10.SINGLE: appears when the unit is set to play just one track at a time. When it is not
shown, the CD plays continuously through all tracks. The function is controlled by the
SGL/CTN button.
11.RELOOP: shows when a loop is programmed. (repeating a particular area)
RELOOP Flashing: Loop is programmed and currently playing.
RELOOP stays on: Loop is programmed but not playing.
12.FOLDER: Shows the current folder number.
13.TRACK: Shows current track number.
14.MINUTE: Shows “minutes” time information of current track.
15.SECOND: Shows “seconds” time information of current track.
16.FRAME: Shows “frame” time information of current track. (1 frame = 1/75
th
sec.)
17.ANTI SHOCK AND BUFFER INDICATOR: Shows the number of seconds left in the
buffer memory.
18.PITCH DISPLAY: Shows the actual percentage of speed change, selected with the
SPEED slider. The small red colored padlock is shown when the pitch lock function
(Master Tempo) is active.
HOW TO USE
Most of the common functions are explained in the previous chapter “controls and
functions” In this chapter we talk about the functions that need a little more explanation.
SOME GENERAL FUNCTIONS:
SLEEP MODE:
The CD player automatically shuts off the transport and laser after about 15 minutes
(when in pause or cue mode). This extends the life of your motor drive and laser. During
sleep mode the display shows the word “SLEEP”. To wake up the player, just press the
cue or play button, the display turns to normal and is ready to receive instructions.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Synq CDX-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Synq CDX-2 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 2,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info