738518
6
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2017 by Conrad Electronic SE. 1528595_V1_0217_02_VTP_m_en
Countdown Mode
In the countdown mode, a time of maximal 99 hours, 59 minutes, 59 seconds can be set.
Depending on the operating mode of the weekly switch timer, the device is switched off or on
after the timer has counted down.
Operating mode „ON“ or „AUTO ON“ (socket/appliance is switch on):
The connected device is switched off after the timer has counted down
Operating mode „OFF“ or „AUTO OFF“ (socket/device is switched off):
The connected device is switched on after the timer has counted down
When the countdown mode was started, all automatic switching programmes are deactivated
for the duration of the countdown! That means that the device is not switched on or of at the
times and weekdays programmed in the programme group until the timer has counted down.
Setting the timer and start of the countdown timer:
From the time display, press the „MENU“ button 2x until the symbol „CTD“ appears on the
bottom right and the hours of the timer ash „0:00:00“.
Set the hours of the countdown timer with the „+1“ or „-1“ button (keep the respective button
pressed down for quick setting).
Press the „OK“ button briey to conrm.
The minutes of the countdown timer start ashing; set the minutes with the „+1“ or „-1“ button
(keep the respective button pressed down for quick setting).
Press the „OK“ button briey to conrm.
The seconds of the countdown timer start ashing; set the seconds with the „+1“ or „-1“ button
(keep the respective button pressed down for quick setting).
The countdown timer is started by pressing the „OK“ button briey.
When the timer has counted down (at 0:00:00), the front socket and the device connected to
it is switched on or off.
When the weekly switch timer is in „ON“ or „AUTO ON“ mode (socket/appliance
is switched on), the connected appliance will be switched off when the timer has
counted down.
When the weekly switch timer is in „OFF“ or „AUTO OFF“ mode (socket/device is
switched off), the connected device is switched on when the timer has counted
down.
Early termination of the countdown timer:
If the countdown timer is to be terminated early, press the „MENU“ button several times until
the timer is shown on the display.
When the weekly switch timer is on the display of time mode or the programming of
the switching times, the countdown timer cannot be reset!
Then press the „RCL“ button briey.
The countdown timer is then reset to „0:00:00“, the hours of the timer ash again (you can
now set a new time and restart the countdown timer as described above).
Press the „MENU“ button briey to leave the setting mode and to return to the time display.
Alternatively, do not press any button for 2 minutes.
This deactivates the countdown timer and the weekly switch timer continues with its normal
switching program.
Random function
With the random function, the set switch on/off times are delayed by 4 to 32 minutes.
The random function can only be used for the switching times of the programme
groups, but not for the countdown timer.
To turn the random function on or off, press the „-1“ button briey.
When the random function is turned on „RND“ is ashing on the bottom right on the display.
Reset
In order to reset the weekday switch timer to the factory settings and to delete all programming,
keep the countersunk „RST“ button pressed for several seconds. All display segments are
shown on the display, then the weekday switch timer is ready for operation.
Please note:
All settings and programming are lost upon reset!
Activating the lighting of the LC display/night light function
With the switch „ “ the lighting of the display can be switched on or off.
It can also be used as night light due to its large size and brightness.
Care and Cleaning
Before cleaning the product, disconnect the appliance from the weekly switch timer. Discon-
nect then the weekly switch timer from the power supply by pulling it out of the mains socket.
Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these
could damage the housing or even impair operation.
Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable material and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
Technical Data
Operating voltage .................................. 230 V/AC, 50 Hz
Connection power .................................. resistive load: max. 3680 W (230 V/AC, 16 A)
............................................................... inductive load: max. 460 W (230 V/AC, 2 A)
Devices with mainly resistive load are, e.g., light bulbs, heaters, etc.
Powered devices with inductive load are, e.g., engines, control gears, conventional
transformers, energy-saving bulbs, etc.
Protection type ....................................... IP20
Switch type ............................................ Relay (single-pole)
Socket with child protection ................... yes
Switching times per day ......................... 16 On-/Off programme
Shortest switching duration ................... 1 min
Countdown timer period ........................ 1 min to max. 99 h, 59 min, 59 s
Data retention ........................................ with an internal NiMH battery (max. approx. 6 months
with fully charged battery)
Ambient conditions ................................ temperature 0 °C to +40 °C, air humidity 0% to 95%
relative, non-condensing
Dimensions ............................................ 133 x 70 x 80 mm (L x W x H, including plug)
Weight ................................................... 270 g
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sygonix 1528595 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sygonix 1528595 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info