750861
27
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
23
English
English
Symptom Cause Remedy
The standby indicator does
not light up
The mains lead is unplugged/
the multipoint connector is
switched off.
Check the mains lead/switch the multipoint
connector on.
There is no image, no sound,
no display
There is no power supply Check the connection cables
There is a short circuit in
coaxial cable
Disconnect device from mains power
supply, eliminate the short circuit in the
coaxial cable or connections, reconnect,
and activate device
Cables are missing or
defective.
Check your connecting cables
A wrong video format was
selected in the OSD settings
Check the settings to make sure your TV
supports the selected format
There are small blocks in the
video, occasionally no sound,
occasionally no signal
The signal is too weak Check for defective cables or connectors.
Alternatively, reduce the coaxial cable
length
Scrambled channel message The channel is scrambled. Select an alternative channel.
No response to remote
control
The receiver is off. Plug in and turn on the plug.
The handset is not aimed
correctly.
Aim the handset at the IR sensor.
The IR sensor is obstructed. Check for obstructions.
The handset batteries are
exhausted.
Replace the handset batteries.
Password forgotten The default password is 0000 Contact the local Service Hotline or send an
email to our support via www.strong.tv
The external USB HDD does
not start.
The power consumption is
too high.
Connect an extra power supply adapter to
your USB HDD device.
The receiver switches to
standby automatically.
The Auto Standby function
is activated and has reached
the set time (default 3 hours).
Set the power down time or disable it in the
SettingsTime Setting menu, parameter Auto
Standby After.
13.0 SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8PSK
Input symbol rate: DVB-S2 8PSK/QPSK: 2 ~ 45 Ms/s
FEC decoder: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 QPSK mode
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in DVB-S2 8PSK mode
Video
Profile level: H.264, H.265, VP9
Max. video resolution: 2160p
Aspect ratio: 4:3 and 16:9
Video resolution: HDMI: 480i/480p, 576i/576p, 720p, 1080i, 1080p, 4Kx2K
SCART: PAL
Audio
Audio decoding: MPEG-1 LAYER 1&2, E-AC-3
Audio mode: Stereo L/R, Dolby® Digital, Dolby® Digital Plus*
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT7840 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT7840 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Strong SRT7840

Strong SRT7840 Gebruiksaanwijzing - Italiano - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info