NOTE: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used
with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote
control.
2.0 YOUR RECEIVER
2.1 Front Panel
Figure 1
1. Power To put the receiver in and out of standby mode.
2. Menu Used to display the main menu.
3. OK To show TV/Radio channel list and to select a program, highlight a line.
4. CH
pq Channel up & down.
5. VOL
tu Volume up & down.
6. Lock LED Signal Indicator
7. Power LED Power indicator
8. Display Shows channel number, boot/loader message and time in standby mode.
2.2 Rear Panel
Figure 2
1. SAT IN To connect the coaxial cable from your LNB on the satellite dish to this connector.
2. SAT OUT Gives you the possibility to connect an extra satellite receiver (analogue or digital).
3. RS-232 Serial Port This serial port can be used to connect your PC to your receiver to download new
software versions to your receiver
4. AUDIO Right and Left Give you the possibility to connect the audio signal to an external amplifier, or the
audio input of your TV.
5. VIDEO This connector has a constant video signal for additional VCR-connections.
6. S/PDIF Use the coaxial output to connect your receiver to the input of your digital audio
amplifier.
7. TV SCART To connect your receiver to your TV using a SCART cable.
8. DVD/VCR SCART To connect your receiver to your DVD or Video recorder using a SCART cable.
9. ON/OFF Power Switch
10. Power Cord Your receiver requires a current of 100 ~ 240 V AC (Auto-selectable), 50 / 60 Hz ± 5 %.
Make sure to check the power specification before connecting your receiver to the wall
outlet.
2.3 Remote Control Unit (RCU)
Figure 11
1. STANDBY/ON: To switch the receiver ON or to Standby.
2. SAT To show the scanned satellite list.
3. MUTE To turn the sound ON/OFF.
4. NUMERIC KEYS (0~9) To insert numbers.
5. RECALL To switch to previously watched channel.
6. TV/RADIO To switch between TV and RADIO.
7. MENU To activate main menu.
8. EPG (Electronic Program Guide) To show the TV/Radio program guide.
9. FAV To get favorite channel list you set before.
10. EXIT To exit current menu or for cancellation.
11. OK To confirm the highlighted menu item.
12. tu: To change volume in viewing mode.
13. pq: To change program.
14. VOL+/- To change volume
15. PAGE pq Page up/down in menu.
16. AUDIO To select or change the Audio language.
17. PAUSE To freeze the picture.
18. ZOOM Zoom function.
19. i To show the current channel information.
