480533
11
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
PART 1 • English
8
Auto Search
Search and install all channels automatically. This option overwrites all previously installed channels.
1. Select Auto Search and press OK or u to start channel search.
2. To cancel channel search, press EXIT.
Manual Search
Install new channels manually. This option adds new channels without changing the current channels list.
1. Select Manual Search then press OK or u. The channel search screen will appear.
2. Press the tu to select the channel number or enter the channel number using [0..9] buttons.
3. Press OK to start searching channels
A found channel will be saved and added to the channels list. If channels can’t be found, then exit the menu.
Tip: Signal quality and level indicators will show presence of the signal on selected channel frequency.
Country
Select your country of residence. It is important to set the correct country as some tuning parameters depend on the country.
Antenna power
Enable Antenna Power if an external active antenna is connected.
5.4 Time Setting
Press MENU select Time. The menu provides options to adjust the time settings and allows you to setup scheduled
recordings of programmes.
Press pq to select an option and press tu to adjust the setting. Press EXIT to exit the menu.
5.4.1 Schedule
In this menu you can setup the schedule for automatic recording or switching to the defined channels at a particular
date/time.
Add Press RED button to add a new booking. In the appearing dialog select the desired channel type and number,
the starting date and time, end time, repeat cycle (once, daily or weekly) and mode (view or record).
Once you set all parameters, press OK to store your booking.
Edit Press GREEN button to edit an existing booking.
Delete Press BLUE button to delete a booking from the list.
Tip: If you have scheduled recordings, make sure to have an external storage device connected to the receiver.
Check periodically, if free space is available on the storage device for future recordings.
Time Offset
Select auto or manual for GMT offset adjustments.
Country Region
Select the Country Region when Time Offset is set to Auto.
Time Zone
Select the Time Zone Offset when Time Offset is set to Manual.
Sleep
This function will switch the receiver to standby when it doesn’t receive any commands for a given period of time .
When this option is set to OFF, the function is disabled. Please set the time after which the receiver should go to stand
by or select OFF to disable this function.
5.5 Option
Press MENU and select Option. In this menu you can to adjust the OSD Language, Subtitle Language, Audio Language
and Digital Audio mode.
Select an option and press tu to adjust the setting. Press EXIT to exit the menu.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Strong-SRT-8110

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8110 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info