751410
21
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
Problem Possible cause and solution
Any other reception or
signal related problems
1. Generally cables might have loosened. Moisture might
have entered into cables or connectors.There is heavy rain
or heavy storm at present (DVB-S/S2 and -T/T2). Check the
cable connections. DVB-S/S2 and -T/T2: Check all equipment
connected between the reception point and the TV.
Wait until heavy rain/thunderstorm passed. If no solution ask a
local satellite specialist for advice.
2. DVB-S/S2: The satellite dish is NOT aligned to the (correct)
satellite(s). Ask a local satellite specialist for advice.
3. DVB-S/S2: Satellite dish is too small. Trees or buildings are in
path. Ask a local satellite specialist for advice.
4. DVB-S/S2: Signal is too strong, maybe need to be atennuated.
Ask a local satellite specialist for advice.
No colour
1. Devices are not properly connected (scart, RCA sockets) or
wrong/bad cables are used.
2. Adjust the saturation.
3. Switch TV on another channel. It is possible that the current
programme is broadcast in black and white.
No picture, normal sound
1. Adjust the brightness and contrast.
2. Radio channel is tuned to or the programme is not transmitting
Video signals or another broadcasing interference/failure.
Normal picture, no sound
1. Press the volume up button to increase the volume level.
2. Audio is muted, press ! to restore the sound.
3. If external devices are used to loop the sound through, make
sure to select correct sources and correct sound mode, for details
also check advices in User Manuals from connected devices
4. Maybe a channel w/o audio is tuned to (demo) or the
programme is not transmitting audio signals or there is some
other transmission interference/failure.
Playback of video is
causing picture freeze/
macro blocks or similar
distortion, especially on
HD content.
Read/write speed of your USB device could be too low. Make sure to use
a USB storage device with sufficient speed and space. Pen drives (USB
sticks) may not support sufficient speed.
The remote control does
not work
1. Change the batteries. If you're using rechargable ones take care
to use such with low self-discharge
2. The batteries are not installed correctly or the types have been
mixed
3. IR Sensor is blocked or maybe interfered from bright light
The TV switches off after a
certain time
Switch ON the TV and check settings for automatic STBY function, by
default the TV switches OFF after 4 hours to fulfil European low power
regulations and help you to save energy.
NOTE: If the problem persists after these solutions, please contact your local
support centre or send a support mail via our website www.strong.tv.
17
English
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 40FB4013N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 40FB4013N in de taal/talen: Engels als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Strong SRT 40FB4013N

Strong SRT 40FB4013N Gebruiksaanwijzing - Nederlands - 23 pagina's

Strong SRT 40FB4013N Gebruiksaanwijzing - Deutsch - 27 pagina's

Strong SRT 40FB4013N Gebruiksaanwijzing - Français - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info