751396
21
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
1.22.5 Software update via USB
From time to time you can check if there is an improved software version available. This can be viewed
and downloaded from our website www.strong.tv. Search the model number on our website's service
support section. If there is an improved software version you can download the file and copy it to the
root of a USB device. Then press pq button to select Software Update (USB) from the SETUP menu on
your TV. Afterwards plug your USB device into the USB slot and pressENTER to update the respective
software. Confirm with Yes using t u. When the update is completed, remove the USB stick, disconnect
your device from the main power supply and plug in again.
7.0 TROUBLESHOOTING
There maybe various reasons for abnormal operation of your TV set. Check your TV set according to
the general procedures shown below. Additionally, we strongly recommend reading the detailed
troubleshooting of your TV set in the full user manual available on our website www.strong.tv. If your TV
set does not work properly after checking the general and detailed troubleshooting, please contact your
dealer, the local Service Hotline, or send an email to our support via www.strong.tv. DO NOT try to open
or disassemble your TV set. It may cause a dangerous situation and the warranty will be void.
Problem Possible cause and solution
The LED/Standby indicator
does not light up
1. Check whether the power connector is completely plugged at
the TV and into power socket.
2. Make sure that the switch on multipoint connectors is
switched ON as well.
3. The electrical outlet may be damaged.
4. STBY LED is defective.
No Signal 1. The TV is not connected to a signal source (DVB-C, DVB-S/S2
or DVB-T/T2) or the antenna (terrestrial or satellite antenna)
is maybe not aligned correctly respectively the according
connection and distribution equipment might show
malfunction, incompatibility or defectives.
2. DVB-T/T2: Active antennas need antenna power switched ON
or external power connected.
Antenna is maybe out of digital signal reception in your area. Check
reference from service providers about coverage.
3. DVB-S/S2: Incorrect values of some tuner parameters (e.g. one
or some channel(s) changed to another transponder or are no
longer emitted).
Incorrect values of LNB parameters.
The picture and sound
remain frozen, or macro
blocks or similar distortion
are visible on the screen.
DVB-S/S2,DVB-T/T2: The reception signal is too weak or disturbed by
electromagnetic, high-frequency, or other interference signals. DVB-T/
T2 : Disturbances caused by signal reflections.
DVB-C, DVB-S/S2: The connection cables at the signal source are too
long (too high attenuation).
DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got
misaligned after storm etc.
17
English
21

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Strong-SRT-24HC3023

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 24HC3023 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 24HC3023 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Strong SRT 24HC3023

Strong SRT 24HC3023 Gebruiksaanwijzing - Nederlands - 23 pagina's

Strong SRT 24HC3023 Gebruiksaanwijzing - Deutsch - 27 pagina's

Strong SRT 24HC3023 Gebruiksaanwijzing - Français - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info