751645
24
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
7.5.1 Satellite Installation
In this menu below you will find level and quality bars to optimize the signals for your dish.
Use p/q to select one or more satellites. Press OK to mark or unmark them. As soon as you have made
your selection, press u to jump to the right side of the screen where you can select a satellite and add
the corresponding settings as DiSEqC ports.
By the end of the setup you can start the scan process by pressing the BLUE and Scan button.
SAT Select a satellite with t u. If you only mark one satellite you cannot select
another.
TP Select a transponder if you want to scan or adjust the dish on a selected
frequency. Press OK to call the overview list.
LNB type Default is set to 9750/10600 which is the most common setting for LNBs
(Universal type). Select another if you are using a different type LNB which
needs other values.
LNB voltage Select On to increase the LNB voltage if you use a long coaxial cable to
compensate for decrease of the LNB supply voltage.
SatCR Select one of the frequencies if you are connected to a SatCR system. SatCR is
a special system which mainly is used in apartment buildings to provide one
satellite dish system to many users at once. To use this function, contact your
property management or system installer. If SatCR is activated, other settings
below are not used. For normal use, default is set to Off.
LNB Power Default is set to 13/18V. The others functions are intended for specialized staff
only.
22KHz Select Off or On if you use a special dish setup. For normal use this is default
set to Auto.
ToneBurst If you are using a legacy type switch to switch between 2 satellites, setup your
port to the satellite you selected above.
DiSEqC 1.0 If you are using a DiSEqC 1.0 switch to switch between 2, 3 or 4 satellites,
setup your port to the satellite you have selected above.
DiSEqC 1.1 If you are using a DiSEqC 1.1 to switch between 5 to 16 satellites, setup your
port to the satellite you’ve selected above.
Motor If you are using a motor drive to move between satellites, setup the motor
drive by using DiSEqC 1.2 or DiSEqC 1.3 protocols.
NOTE: We strongly advise to ask your local installer to help install motor and
settings.
There is also the possibility to change (add, edit or delete) a satellite or transponder by pressing INFO
and search for channels: Auto search, Manual search, Blind scan and Network search. Press the BLUE
button to display the Scan menu and press OK to confirm.
7.5.2 DVB-T/T2 Installation
In this menu you can select Country, Antenna power, LCN modes and search for channels.
Below in the screen you will find level and quality bars for optimizing the best signals of your terrestrial
antenna.
20
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 2402 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 2402 in de taal/talen: Engels als bijlage per email.

De handleiding is 1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Strong SRT 2402

Strong SRT 2402 Gebruiksaanwijzing - Deutsch - 32 pagina's

Strong SRT 2402 Gebruiksaanwijzing - Français - 29 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info