597138
44
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
44
TROUBLESHOOTING
If a solution to your problem is not listed below, please call our technical support team (see below).
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
System is not receiving power, or
is not powering up.
Cable from power adapter is loose or
unplugged.
Confirm that all cables are connected correctly.
Confirm that the power adapter is securely connected to the
back of the unit.
Cables are connected but system is not
receiving sufficient power.
Confirm the system is powered on (LED indicators on front
panel should be on)
If the DVR is connected through a power bar or surge protector,
try bypassing it and connecting power directly from the mains
socket to the DVR.
Confirm that there is power at the outlet.
Remote control is not detected by
the system.
Batteries in the remote control are
drained.
Install 2x fresh AAA 1.5V alkaline batteries in the remote
control. Ensure correct orientation.
There are no batteries in the remote
control.
Hard Disk Drive (HDD) is not
detected by the system.
HDD cables are loose or not connected
properly.
Remove the housing and check that the cables are firmly
connected.
There is no HDD in the system.
Open the housing and install a 3.5” SATA HDD (up to 2TB).
HDD is full and the unit is no
longer recording
Overwrite mode is not enabled.
Check configuration in Main Menu System General.
Mouse not detected by the
system.
Mouse cable not firmly connected to
the system.
Firmly connect the mouse cable to the USB port on the rear
panel of the DVR.
Mouse is not connected to the system.
System needs to be reset.
Power off the system (disconnect power cable). Firmly connect
a USB mouse to the USB port on the rear panel of the DVR.
Reconnect the power cable to the DC 12V port.
There is no picture on selected
channels / camera picture is not
being displayed.
Camera cables are loose or have been
disconnected.
Check the camera video cable and connections.
Disconnect and reconnect the cable at both the system and
camera ends.
Reconnect the camera to another channel or use another cable.
There is no sound from attached
cameras.
Audio cables are loose or have been
disconnected.
Check the audio connections to the DVR.
Audio channels are disabled in the
system menu.
Check configuration in Main Menu System Encode.
Volume on external speakers (not
included) is low / muted / off.
Increase volume on external speakers (not included).
A “whirring” noise is coming from
the system.
Fan is active.
This is normal the exhaust fan is working.
The system beeps at start up.
This is normal.
The system beeps during motion
detection.
Motion detection is enabled and the
alarm buzzer is activated.
Check configuration in Main Menu Alarm Alarm Input.
WARRANTY AND TECHNICAL SUPPORT
Support:
www.storageoptions.com/support/
Warranty:
www.storageoptions.com/warranty/
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Storage Options 53882 - DIY Home CCTV Kit Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Storage Options 53882 - DIY Home CCTV Kit Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 3,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info