533978
9
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
9
Now press the PAIR key (on the front of the camera) within
the next 30 sec.
Pressing the PAIR key the coupling occurs automatically,
the image of the new camera appears on the monitor.
Note: If you fail to press the PAIR key within 30 sec. the
monitor returns to normal mode and there is no coupling
of the new camera.
Mounting and Installation of the Camera
Before you install the camera, carefully plan where and how it will be positioned, and where you
will route the cable that connects the camera to the power supply.
Also consider the following:
Angular coverage (60°) and range (5 m) of PIR.
Lightening conditions (Do not adjust the camera lens to direct sunlight/a strong light source).
Power supply (Do not expose the power supply to the effects of the weather! Protect the connector
assembly against moisture.)
Fastening (The degree of protection IP 65 allows fastening outside,
though the camera should be mounted in a sheltered position. Make
sure to mount the camera on a rugged underground that prevents
the camera against falling down and/or strong vibrations.)
Install the monitor and the camera at first temporarily and check
whether the desired monitoring area is completely covered and
the radio transmission is reliable: if necessary optimize the confi-
guration of the system before drilling holes for the camera bracket!
Make sure not to damage any wiring/pipes in the wall.
Mark the position of the three holes by using the camera bracket as a template. Drill the holes
and fix the mounting bracket with suitable screws. Screw the antenna to the antenna jack.
Then attach the camera to the bracket (for ceiling fastening use the thread on top of the camera
 for that purpose remove the black protective foil). Carefully align the camera and the antenna.
Make sure to only use the power supply marked 9 V DC/0.6 A!
Plug the power supply into a 230 V socket and connect the plug to the 9 V power input of the
camera.
Night Vision
16 high-performance infrared LEDs allow transmission of pictures even in low light conditions
(picture on the screen is black/white then). Due to the integrated light sensor in the front the night
vision function will be automatically switched on in low light condition.
Specifications
see page 10
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stobo Multifon Security III Camera bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stobo Multifon Security III Camera in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info