608751
23
Verklein
Vergroot
Pagina terug
1/138
Pagina verder
HOW TO START - STOP THE MOTOR /USING THE MACHINE 7
EN
Both switches must be en-
abled in order to switch the motor on and keep it run-
ning. The motor will stop if either switch is released.
STOPPING THE MOTOR (Fig. 1)
To stop the motor:
– Release the switches (5) and (6).
– FIRST unplug the extension lead (3) from the
mains socket (4) and THEN disconnect the
power cable (2) of the machine from the exten-
sion lead (3).
When the motor is switched
off, a few sparks may be seen near the ventilation
slots; this is perfectly normal and does not damage
the tool in any manner.
NOTE
NOTE
STARTING THE MOTOR (Fig. 1)
Before starting the motor:
– Press the upper part of the catch found in the rear
handgrip and insert the power lead (1) so that it
fastens to the cable clamp.
– FIRST connect the power cable plug (2) to the ex-
tension lead (3) and THEN plug the extension lead
into the mains socket (4).
– Remove the blade protection devices.
– Make sure the blade is not touching the ground
or any other object.
– Make sure that the front handgrip is locked in
the centre position.
To start the motor:
1. Hold the machine firmly with both hands.
2. Rotate the handle of the safety switch (5 located
in the front handgrip) and press the switch (6).
6. HOW TO START - STOP THE MOTOR
For your safety and that
of others:
1) Do not use the machine without having
read the instructions carefully. Become
acquainted with the controls and the pro-
per use of the machine. Learn how to stop
the motor quickly.
2) Only use the machine for its intended use,
that is “the cutting and trimming of hedges,
consisting in plants with small sized
branches”. Any other use may be danger-
ous and severly damage the machine. Ex-
amples of improper use may include, but
are not limited to:
general grass cutting and in particular,
near kerbs;
chopping material for composts;
pruning;
using the machine for cutting non-plant
material;
use of the machine by more than one
person.
3) Residual risks: even all the safety rule are
obeyed, there still can be a certain resid-
ual risk, which cannot be excluded. From
the kind and construction of the tool the
WARNING!
foreseeable potential endangerments can
be:
Contact with the unprotected cutting
teeth.
Involve fingers or hands into the moving
cutting blade.
Unexpected, sudden movement of the
cutting blade.
Thrown away of chips, it may damage
your eyes.
Damage of the hearing, if no protection
of the ears is carried.s
4) Keep in mind that the operator or user is
responsible for accidents or hazards oc-
curring to other people or their property.
5) Always wear suitable clothing when using
the machine. Your dealer can provide you
with all the information on the most suit-
able accident-prevention devices to guar-
antee your safety.
6) Mow only in daylight or good artificial
light.
7) Thoroughly inspect the whole work area
and remove anything that could be thrown
up by the machine or damage the cutting
device (branches, iron wire, hidden
wiring, etc.).
7. USING THE MACHINE
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stiga SHT 700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stiga SHT 700 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks als bijlage per email.

De handleiding is 2,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info