608618
4
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
ENGLISH
GB
MOWING HINTS
For the best effect follow this advice:
- mow regularly
- use full throttle on the engine.
- keep the underside of the mower deck clean.
- use sharp blades.
- do not mow wet grass.
MAINTENANCE
No service work to the engine or mower
deck is to be carried out unless the fol-
lowing action has been taken:
- the engine has been stopped.
- the ignition key has been removed.
- the ignition cable has been removed
from the spark plug.
- the parking brake is engaged.
- the mower deck has been disengaged.
CLEANING
Rinse off the underside of the mower deck casing
with a garden hose after using the mower.
If grass has dried onto the casing dismantle the
mower deck and scrape the underside clean.
If necessary, to improve the underside it can be
painted to prevent rust.
Do not spray with high pressure water
against the bearing housings on top of
the mower deck when the transmission
cover is removed. Otherwise water may
penetrate the bearings.
LUBRICATION
The attachment's support wheels are fitted with
two grease nipples J (fig 1). Lubricate using a uni-
versal grease periodically during the season.
Grease other moving parts too.
REPLACEMENT OF DRIVE BELT
CENTRAL BELT PULLEY - MOWER
DECK
1. Unhook the tension roller spring H.
2. Remove the mower deck from the machine.
3. Unscrew the screws K and remove the transmis-
sioncasing(fig4).
4. Slide in the unit towards the machine and pull
off the v-belt from the central belt pulley.
5. Change the damaged v-belt. Always use an orig-
inal v-belt. The tension roller G should rest to the
left of the v-belt as seen from the driver's seat
(fig 3).
6. Fit the screws K (fig 4).
7. Fit the mower deck in the machine's attachment
brackets.
8a. Park -1999:
Hook the tension roller spring H into the floor on
the right-hand side (fig 3).
8b. Park 2000-
Hook the tension roller spring H into the fastener,
just behind the front right wheel (fig 3).
REPLACEMENT OF THE DRIVE
BELT IN THE MOWER DECK
1. Remove the screws K and remove the transmis-
sion casing (fig 4).
2. Loosen the spring which holds the tension roller.
3. Change the v-belt and replace in the reverse or-
der. Always use original v-belts.
BLADES
Use protective gloves to prevent cuts
when changing blades/blade tips.
Make sure the blades are always sharp. This gives
the best cutting results.
SHARPENING
For safety reasons the blades must not be sharp-
ened on an emery wheel. Incorrect sharpening ( =
high temperature) can result in the blades becom-
ing brittle.
When the blades are due to be sharpened, the wet
grinding method with a waterstone or grindstone is
to be used.
Following sharpening, the blades must
be balanced to avoid vibration damage.
CHANGING BLADES
Always use original spare parts when changing the
blades, blade attachments or bolts.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stiga 110 S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stiga 110 S in de taal/talen: Engels als bijlage per email.

De handleiding is 0,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info