643154
7
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
– 12 –
– 13 –
GB
1� About this document
Please read carefully and keep in a safe place�
Under copyright. Reproduction either in whole or
in part only with our consent.
Subject to change in the interest of technical
progress.
Symbols
!
Hazard warning!
...
Reference to other information in the
document�
2� General safety precautions
!
Disconnect the power supply before
attempting any work on the unit�
• Installing these units involves work on the mains
voltage supply; installation must therefore be
carried out professionally in accordance with
the applicable national wiring regulations and
electrical operating conditions (
D
-VDE 0100,
a
-ÖVE/ÖNORM E 8001-1,
h
-SEV 1000)
• The light must be positioned so that it is not
expected that anybody can stare into the light
for any prolonged period from a distance of less
than 0.3 m.
The floodlight enclosure heats up when the light
is on. Only adjust the angle of the LED panel
once it has cooled down. Do not look into the
LED light at short range or for any prolonged
period (> 5 min). You could damage your retina.
• Do not install the unit on (normally) flammable
surfaces.
3� XLED home 2 / XLED home 2 XL
Proper use
Sensor-switched floodlight suitable for wall
mounting outdoors.
Fully swivelling LED panel and moveable sensor.
Available as a standalone floodlight or intercon-
nected with the slave version.
Movement triggers lights, alarms and many
other devices. With the fully swivelling panel, the
floodlight can be used at home to provide perfect
illumination for lighting up property, or commercially
for lighting up business premises. In conjunction
with the opal cover, this extremely ecient technol-
ogy provides wide-area lighting.
Models
XLED home 2
XLED home 2 XL
Package contents (Fig� 3�1)
Sensor adjustment range (Fig� 3�2 / 3�3 / 5�6)
Product dimensions (Fig� 3�4 / 3�5)
Product components (Fig� 3�6)
A LED panel
B Enclosure
C Wall mount
D Sensor unit
E Twilight setting
F Time setting
4� Electrical installation
Switch OFF power supply (Fig� 3�7)
Connecting the mains power supply lead
The supply lead consist of three wires:
L = phase conductor (usually black, brown or grey)
N = neutral conductor (usually blue)
PE = protective-earth conductor (green/yellow)
If you are in any doubt, identify the conductors
using a voltage tester; then disconnect from the
power supply again. Connect the phase conductor
(L) and neutral conductor (N) to the terminal block.
The protective-earth conductor can be looped
through by means of terminal (E).
Wiring diagram (Fig� 3�7)
Important:
Incorrectly wired connections will produce a short
circuit later on in the product or your fuse box. In
this case, you must identify the individual conduc-
tors once again and re-connect them.
The light source of this luminaire cannot be
replaced. If the light source needs to be replaced
(e.g. at the end of its service life), the complete
luminaire must be replaced.
5� Mounting
• Check all components for damage.
• Do not use the product if it is damaged.
• Select an appropriate mounting location, taking
the reach and motion detection into considera-
tion. (Fig� 4�1)
The most reliable motion detection is achieved
by mounting the unit to face across the direc-
tion in which people walk and by making sure no
obstacles (e.g. trees, walls etc.) interrupt the line of
sensor vision (Fig� 4�2 / 4�3).
Mounting procedure
• Switch OFF power supply. (Fig� 3�7)
• Undo retaining screws. (Fig� 4�4)
• Detach enclosure (B) from wall mount (C).
(Fig� 4�5)
• Detach plug-in terminal (male) from wall mount.
(Fig� 4�6)
• Mark drill holes. (Fig� 4�7)
• Drill holes and fit wall plugs. (Fig� 4�8)
• Fit sealing plug. (Fig� 4�9)
Power supply lead, concealed. (Fig� 4�10)
Power supply lead, surface-mounted,
with spacers. (Fig� 4�11)
• Connect conductors. (Fig� 4�12)
• Connect plug-in terminal. (Fig� 4�13)
• Fit enclosure onto wall mount. (Fig� 4�14)
• Screw in retaining screws. (Fig� 4�15)
• Switch ON power supply. (Fig� 4�15)
• Make settings "6� Function"
6� Function
Factory settings for control dials
Twilight setting (E): 2000 lux
Time setting (F): 8 s
Twilight setting (Fig� 5�1 / E)
infinitely variable
Control dial set to
= twilight operation,
approx. 2 lux
Control dial set to
= daylight operation,
approx. 2000 lux.
Note: To adjust the detection zone in daylight,
the control dial must be set to
= daylight
operation.
Time setting (Fig� 5�1 / F)
Control dial set to max = longest time, approx.
35min
Control dial set to min = shortest time, approx. 8s
Note: When setting the detection zone,
we recommend selecting the shortest time.
Reach setting/adjustment
The detection zone can be optimised to suit
requirements.
Sensor unit
Sensor unit swivels through 180°. (Fig� 5�3)
Sensor unit tilts through 90°. (Fig� 5�6)
Adhesive shrouds (Fig� 5�4)
The film shroud can be used for masking out any
number of lens segments to limit reach as required.
Inadvertent triggering is ruled out or the sensor can
be targeted to watch over danger spots (Fig� 5�5).
Other information:
Floodlight adjustment range (Fig� 3�2 / 3�3 / 5�2)
7� Operation / maintenance
The unit is not suitable for burglar alarm systems
as it is not tamperproof in the manner prescribed
for such systems. Weather can aect operation of
the sensor-switched LED floodlight. Strong gusts
of wind, snow, rain and hail may cause the light
to come ON when it is not wanted because the
sensor is unable to distinguish between sudden
changes in temperature and sources of heat.
The detector lens may be cleaned with a damp
cloth if it gets dirty (do not use cleaning agents).
8� EC Declaration of Conformity
This product complies with the requirements
defined in the following standards, legislation and
directives:
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
WEEE 2012/19/EU
GB
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Steinel-XLED-home-2-XL

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel XLED home 2 XL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel XLED home 2 XL in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Steinel XLED home 2 XL

Steinel XLED home 2 XL Gebruiksaanwijzing - Alle talen - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info