592461
6
Verklein
Vergroot
Pagina terug
1/73
Pagina verder
1110
GB
Operation
Technical Specifications
If you want the connected
load to come on independ-
ently of a heat source in the
detection zone, briefly oper-
ate the indoor mains power
switch. The connected load
is subsequently activated
for the set time. Weather
influences may affect the
function of the SensorLight.
In case of strong gusts
of wind, snow, rain and
hail, switching errors may
occur, since the sudden
temperature deviations can-
not be distinguished from
sources of heat. The multi-
lens (detector lens) can be
cleaned with a damp cloth
if it gets dirty (do not use
cleaning agents).
Function
Once the SensorLight has
been connected and attached
to the wall mount, the system
can be switched on. Three set-
ting controls are provided on
the light's sensor lens.
a) Twilight setting
You can set the light to
come "ON" at any light level
from approx. 2 lux to 2000
lux. Control turned fully
clockwise means daytime
operation at approx. 2000
lux. Control turned fully
anticlockwise means twi-
light operation at approx. 2
lux. (Light is set to daytime
operation on leaving the
factory.) The SensorLight
control must be turned fully
clockwise when adjusting
the detection zone and
performing the function test
in daylight.
b) Switch-off delay (time
setting)
The "ON" time can be var-
ied continuously between
approx. 10 sec. and a
maximum of 15 min. Con-
trol turned fully clockwise
means shortest time of
approx. 10 sec., control
turned fully anticlockwise
means longest time, ap-
prox. 15 min. (Light is set to
shortest time on leaving the
factory.) The shortest time
setting is recommended
when adjusting the Sen-
sorLight's detection zone
and performing the func-
tion test.
Infinitely variable
brightness control
(Watt-o-matic)
The following functions
can be controlled using the
dimmer:
1) Control turned fully clock-
wise means that the Sen-
sorLight is switched
"OFF". The light on-
ly switches to maxi-
mum output when move-
ment occurs in the sensor
zone.
2) Turning the control from
the middle setting to ful-
ly anticlockwise infinite-
ly varies SensorLight
brightness from approx.
10 watts to a max. of 30
watts (light "ON"
perman
-
ently). This means: At
a permanent light "ON"
setting, for example, of
30 watts, the light will
only switch to maximum
output (60 watts) when
movement occurs in the
sensor zone.
3) Dimmer control turned
fully anticlockwise and
twilight setting control
turned fully clockwise:
In this setting, the Sen-
sorLight is permanent-
ly "ON". Using an "ON/
OFF" switch fitted in the
building's electrical wir-
ing system, the Sensor-
Light can be operated as
a normal light.
0 – 50 %
approx. 10 sec. – max. of 15 min.
Power supply: 220 – 240 V/50 – 60 Hz
Output: 60 W bulb max.
Power consumption: 0.7 W
Detection angle of sensor: 360° all-round detection
(with 120° angle of aperture)
Swivelling range of the sensor: 2 x 40° in either direction
"ON" time, adjustable: 10 sec. - 15 min.
Twilight setting, adjustable: 2 lux – 2000 lux
Sensor reach (dependent on the sensor
setting, ambient temperature and
direction of approach):
from the front: 12 m max.
from the side: 6 m max.
Type of enclosure, splashproof: IP 44
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel L 115 S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel L 115 S in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info