754688
13
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
13
760.180 | 17.10
ENGLISH
15 Faults
Your device is designed and manufactured for a long, fault-free, operating life.
If it seems as if a fault has appeared during operation, please check whether this
is perhaps due to an operating error, since you must pay for any costs incurred if
the fault was caused by an operating error, even in the warranty period.
You can resolve the following faults yourself by isolating the possible causes:
XThe device does not work, the display is completely switched off, even the
minus sign does not flash: Check
the correct polarity of the power connection
the fuse in the power cable of the device
the battery cables
XThe device makes too much noise: Check
whether the device stands securely on the floor
whether neighbouring furniture or objects are being set in vibration by
the running coolant compressor. Note that flow noises within the cool-
ing circuit cannot be avoided.
XThe temperature is not low enough: Check
the settings in the "Setting the temperature" section
whether the correct values have been set
whether the battery voltage is perhaps too low
whether excessively large quantities of fresh food have been stored;
check the display again in 24 hours
whether a separate thermometer (not included) shows the correct value
whether the installation location is close to a heat source
XF4 appears in the display:
A fault may have developed in the temperature sensor. The device
continues to operate in emergency mode. Avoid opening the lid too
frequently or for too long. Please contact your specialist dealer.
If none of the abovementioned causes exist and you cannot resolve the problem
yourself, then please contact your specialist dealer. Provide them with the type
designation, index and device number shown on the type plate. The type
plate is located on the upper right side wall of the cabinet. Keep the cabinet
lid closed if a fault develops. This delays the loss of cooling, the temperature
increase, and a possible defrosting.
16 Decommissioning
If the device is to be placed out of operation for a long period of time: Switch
off the device, remove the fuse and disconnect the battery or pull the power
plug. Clean the device and leave the cabinet lid open to avoid the formation of
odors.
The seal integrity of the cooling circuit should be checked.
The device has RF suppression in accordance with EN 55014, which reflects the
EC regulation 2004/108/EEC.
The manufacturer is continually developing and improving all types and models.
Please therefore understand that we must reserve the right to make changes in
form, features, and technology.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steca PF240-H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steca PF240-H in de taal/talen: Engels als bijlage per email.

De handleiding is 1,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Steca PF240-H

Steca PF240-H Gebruiksaanwijzing - Deutsch - 15 pagina's

Steca PF240-H Gebruiksaanwijzing - Français - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info