48145
148
Verklein
Vergroot
Pagina terug
1/191
Pagina verder
137
Adjusting the dot alignment
You may never have to use the procedure described in this section, but after you have
been using your printer for some time you may find that the dots of some graphics
do not align correctly. For example, what should look like:
may come out looking like one of the following:
This is caused when mechanical parts of the printer get out of alignment. This
happens only rarely and you may never experience it at all throughout the life of the
printer. If you do have problems, use the following procedure to correct it.
Make sure that paper is loaded in the printer.
Turn off the printer.
While holding down the control panel’s FORM FEED and ON LINE buttons,
turn the printer back on to enter the Dot Adjustment Mode.
The printer will print something like the following.
Note that the printer will feed the paper forward and back each time during this
operation so you can view the printout.
If the three lines do not align properly, use FONT to move the middle line to the
left or PITCH to move it to the right.
The above step performs alignment for Normal-density mode only. You must
make separate adjustments for the HS-DRAFT (LC-4521 only), CRT graphics
mode I, DRAFT Text, DRAFT Graphics, Double-density, CRT graphics mode II
Triple-density, Quadruple-density, LQ Text and LQ Graphics modes as well.
Press SET/EJECT/PARK to change to another printing mode.
Repeat the above steps for each printing mode, if necessary.
After making changes to adjustments in all the printing modes you want, press
ON LINE to exit the Dot Adjustment Mode and register your adjustments.
or like this
*** DOT ADJUSTMENT SETTING ***
Normal-density
0:
Réglage de l’alignement des points
La procédure suivante est rarement utilisée, cependant, après une certaine période
d’utilisation, les points risquent de ne plus être parfaitement alignés sur certains
graphiques. Par exemple, le graphique suivant:
peut apparaître de la manière suivante:
Ce problème provient d’un décalage des pièces mécaniques. Cela se produit très
rarement et vous n’aurez probablement jamais ce problème pendant toute la durée
d’utilisation de l’imprimante. Toutefois, au cas où ce problème se présenterait,
effectuez les démarches suivantes pour y remédier.
Assurez-vous qu’il y a du papier dans l’imprimante.
Eteignez l’imprimante.
Tout en tenant enfoncée les touches FORM FEED et ON LINE du panneau de
commande, rallumez l’imprimante pour passer en mode de réglage de
l’alignement des points.
L’imprimante imprimera du texte graphique du genre suivant:
Il faut noter que l’imprimante fera avancer et reculer le papier chaque fois
pendant cette opération de manière que vous puissiez voir l’impression.
Si les trois lignes ne sont pas alignées correctement, utilisez la touche FONT
pour déplacer la ligne centrale vers la gauche ou la touche PITCH pour la
déplacer vers la droite.
Ces démarches règlent l’alignement des points en mode d’impression
NORMAL-DENSITY. Vous devez effectuer des réglages séparés pour les modes
HS-DRAFT (LC-4521), CRT GRAPHICS MODE I, DRAFT TEXT, DRAFT
GRAPHICS, DOUBLE-DENSITY, CRT GRAPHICS MODE II. TRIPLE-
DENSITY, QUADRUPLE-DENSITY, LQ TEXT et LQ GRAPHICS.
Appuyez sur SET/EJECT/PARK pour passer à un autre mode d’impression.
Recommencez les instructions ci-dessus pour chaque mode d’impression, le cas
échéant.
Après avoir effectué des réglages dans tous les modes d’impression désirés,
appuyez sur ON LINE pour sortir du mode de réglage de l’alignement des
points et mettre en mémoire les réglages effectués.
ou ainsi
*** DOT ADJUSTMENT SETTING ***
Normal-density
0:
148

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Star LC-4521 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Star LC-4521 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info