805835
13
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
ENGLISH • 13
ASSEMBLY
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Fitting sanding sheets (FIG. B y C)
Warning! Never use the tool without a sanding sheet or
accessory in place.
Fitting sanding sheets with nylon loops (FIG. B)
Warning! Make sure that the tool is switched off and
unplugged.
fPress the sheet firmly and evenly onto the sanding
base (4), making sure that the holes in the sheet line
up with the holes in the base.
Fitting regular sanding sheets (FIG. C)
Warning! Make sure that the tool is switched off and
unplugged.
fSoften the sanding sheet by rubbing its non-abrasive
side over the edge of a worktop.
fPress the paper clamp levers (5) upwards to release
them from the retaining grooves and open the paper
clamps (5) by pressing them down.
fPlace the sheet onto the sanding base (4).
fInsert the edge of the sanding sheet into the front
paper clamp (5) as shown.
fPress the front paper clamp lever (5) downwards and
locate it in the retaining groove.
fWhile keeping a slight tension on the sheet, insert the
rear edge of the sheet into the rear paper clamp (5).
fPress the rear paper clamp lever (5) downwards and
locate it in the retaining groove.
Fitting and removing the dustbag (FIG. D)
fFit the dustbag (2) over the dust extraction outlet (3).
fSlide the dustbag (2) onto the tool and make sure that
it is securely located.
fTo remove the dustbag (2), pull it to the rear and off
the outlet.
USE
Warning! Let the tool work at its own pace. Do not
overload.
Switching on and off (FIG. F)
fTo switch the tool on, press the part of the on/off
switch (1) marked ‘I’.
fTo switch the tool off, press the part of the on/off
switch (1) marked 0’.
Emptying the dustbag
fThe dustbag (2) should be emptied every 10 minutes.
fShake the dustbag (2) to empty the contents
Hints for optimum use
fDo not place your hands over the ventilation slots.
fDo not exert too much pressure on the tool.
fRegularly check the condition of the sanding sheet.
Replace when necessary.
fAlways sand with the grain of the wood.
fWhen sanding new layers of paint before applying
another layer, use extra fine grit.
fOn very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start
with a medium grit. In both cases, gradually change to
a fine grit for a smooth finish.
fConsult your retailer for more information on available
accessories.
MAINTENANCE
Your Stanley tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Warning! Before performing any maintenance, switch
off and unplug the tool.
fRegularly clean the ventilation slots in your tool using
a soft dry brush or dry cloth.
fRegularly clean the motor housing using a clean
damp cloth. Do not use any abrasive or solvent-based
cleaner.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact the
STANLEY location nearest you.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stanley STEL401 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stanley STEL401 in de taal/talen: Engels, Portugees, Spaans als bijlage per email.

De handleiding is 3.02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info