720568
4
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
4
4
• Allow the motor to cool off before storing it in any
enclosed space.
• To reduce risk of fire, keep the storage area for
the machine, tail pipe and gasoline free of any
vegetation or excess lubricant.
• Replace any worn or damaged parts as a measure
of safety.
• If the fuel tank must be drained, it must be done
outdoors. Handle fuel in an environmentally safe
manner.
• The fuel tank must be drained every time the tiller
is moved.
• To reduce the effects of machine vibrations, wear
protective gloves when operating it.
• Be sure to take breaks after every 30-minute
period of work to avoid Hand Arm Vibration
Syndrome.
PRELIMINARY MEASURES:
When working, always wear stable shoes and long
pants.
Never operate the machine when barefoot or when
wearing light sandals.
Inspect the entire terrain on which you will be
operating the equipment and remove any objects
that could be thrown by the machine.
CAUTION!
– Gasoline is extremely flammable!
Store gasoline only in containers that are designed
for this purpose. Fill it up only in the open air and do
not smoke when filling it.
Fill the tank with gas before starting the motor. Do
not open the gas tank closure plug or fill it with
gasoline while the motor is operating, or when the
motor is hot.
If the gasoline overflows, do not attempt to start up
the motor for any reason.
Instead, remove the equipment from the area
where the gas has been spilled. Then, avoid all
attempts to start up the machine until all gasoline
vapors have evaporated
Replace any damaged tailpipes.
Before use, always visually inspect for worn or
damaged parts. If there are any worn or damaged
parts, or fastening bolts, the entire set must be
replaced.
HANDLING:
The engine must not be operated in enclosed
areas in which carbon monoxide, a dangerous
substance, could become concentrated.
Operate this machine only in daylight or with
proper lighting. Be sure that you keep the unit
balanced on its stands.
Do not operate the machine faster than you can
walk.
For wheeled machines: Work transversely relative
to the slope, never when climbing or descending.
Pay particular attention when you are changing
direction on a slope.
Be especially careful when you are making a
U-turn with the machine or when you are pulling it
towards you.
Never change the motor base adjustment or make
it run too quickly.
Use caution when starting up the motor, in
compliance with the manufacturer’s instructions
and be sure to keep a sufficient distance between
your feet and the tool or tools.
Never put your hands or feet on or under rotating
parts.
Never lift or carry a machine when its motor is
running.
Always shut off the motor before filling the fuel
tank with gasoline. When the motor is running
unloaded, be sure to close the flow restrictor.
If the machine has a gasoline shutoff valve, it must
be closed after any intervention
For safety reasons, the motor rotation speed must
not exceed the data indicated on the power plate.
Always use two persons to transport or store the
power tiller. Do not carry it all by yourself.
G
B
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stanley SGT-25-450-H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stanley SGT-25-450-H in de taal/talen: Engels als bijlage per email.

De handleiding is 2,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info