622133
4
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
6 7
Note:
A marine (boat) battery must be removed and charged on shore. To charge it on board requires equipment specifically designed for marine use. This unit
is NOT designed for such use.
SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE: Follow these instructions and those published by the
manufacturer of any engine you intend to use with this battery charger. Review cautionary markings on the battery charger and
engine.
INTRODUCTION
Congratulations on purchasing your new battery charger. Read this Instruction Manual and follow the instructions
carefully before using your new battery charger.
OPERATING INSTRUCTIONS
Charging the Battery
WARNING: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
•AlwaysdisconnecttheACplugfromtheACoutletfirstbeforedisconnectingthechargerfromthebatterytobe
charged.
•Ensurethatallinstallation,operatinginstructionsandsafetyprecautionsareunderstoodandalwayscarefully
followed by the steps outlined in the "IMPORTANT SAFETY INSTRUCTION" section at the front of this manual.
1. Plug the battery charger’s power cord into an AC outlet. The LCD screen will display the following (the clamp icon will flash and
the empty battery icon will light):
2. The charger's battery clamps are color-coded. Red is positive; black is negative. Connect the battery clamps correctly to the
corresponding connectors on the battery posts following the steps outlined in the "IMPORTANT SAFETY INSTRUCTION" section
at the front of this manual.
Notes: If the clamps are correctly connected with regard to polarity and the unit is properly connected to the AC outlet, the
LCD screen will display the following:
If the clamps are INCORRECTLY connected with regard to polarity, the LCD screen will display the following (the warning
icon in the triangle and the arrows pointing to the “+” and “–” will flash) and a warning will sound until the clamps are
disconnected:
Unplug the charger; then remove the clamps. Reconnect the clamps properly.
3. When the unit is properly connected, press the battery charge button on the control panel on the front of the unit. The LCD
screen will display the following:
The digital display shows the output current that is charging the battery. The bars on the battery icon will change from empty
to solid (bottom to top) repeatedly and the arrow logos pointing to the “+” and “–” flash.
Notes: The “ icon will appear at the top if the surrounding ambient temperature is higher than approximate 40°C. The
icon will appear at the top if the surrounding ambient temperature is lower than 0°C. This is not a fault code, but indicates that
the unit’s temperature compensation feature is operating.
IMPORTANT: If the battery is overheated, the LCD screen will display the following flashing icons:
Disconnect the charger and allow the charger to cool for several minutes. Make sure there is adequate ventilation around the
unit before attempting to charge again.
Always turn the battery charger off by unplugging it when not in use.
DO NOT OPEN THE BATTERY CHARGER — there are no user-serviceable parts inside. Opening the battery charger will void
manufacturer’s warranty.
Operate battery charger only as described in this Instruction Manual.
Check battery charger and components periodically for wear and tear. Return to manufacturer for replacement of worn or
defective parts immediately.
PREPARING TO CHARGE
1. Be sure area around battery is well ventilated while battery is being charged.
2. Remove battery completely from boat/airplane or any confined area before charging.
3. If it is necessary to remove battery from vehicle to charge, or to clean terminals, always remove grounded terminal from
battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc.
4. Clean battery terminals, taking care to avoid getting corrosive material in eyes.
5. Add distilled water in each cell until battery acid reaches level specified by battery manufacturer. This helps purge excessive
gas from cells. Do not overfill. For a battery without cell caps (maintenance free), carefully follow manufacturer's charging
instructions.
6. Study all battery manufacturer’s specific precautions, such as removing or not removing cell caps while charging, and
recommended rates of charge.
7. Determine voltage of battery to be charged by referring to the vehicle manual. The unit is for charging a 12 volt battery only.
Charger Location
Locate charger as far away from battery as cables permit.
Never place charger directly above battery being charged; gases from battery will corrode and damage charger.
Never allow battery acid to drip on charger when reading gravity or filling battery.
Never operate charger in a closed-in area or restrict ventilation in any way.
Marine batteries must be removed and charged on shore.
Do not set a battery on top of charger.
Connection Precautions
Connect and disconnect output clamps or vehicle accessory plug only after removing AC cord from electric outlet.
Never allow clamps to touch each other.
Attach clamps to battery and chassis as indicated in “Battery Installed in Vehicle” steps 5 and 6, or in “Battery Outside of Vehicle”
steps 2 to 5.
Follow these steps when the battery is installed in a vehicle
WARNING: A spark near the battery may cause an explosion. To reduce risk of a spark near the battery:
1. Position AC and clamp cords to reduce risk of damage by hood, door, or moving engine part.
2. Stay clear of fan blades, belts, pulleys, and other parts that can cause injury to persons.
3. Check polarity of battery posts. POSITIVE (POS, P, +) battery post usually has larger diameter than NEGATIVE (NEG, N, –) post.
4. Determine which post of battery is grounded (connected) to the chassis. If negative post is grounded to chassis (as in most
vehicles), see 5. If positive post is grounded to the chassis, see 6.
5. For negative-grounded vehicle, connect POSITIVE (RED) clamp from battery charger to POSITIVE (POS, P, +) ungrounded post
of battery. Connect NEGATIVE (BLACK) clamp to vehicle chassis or engine block away from battery. Do not connect clip to
carburetor, fuel lines, or sheet-metal body parts. Connect to heavy gauge metal part of the frame or engine block.
6. For positive-grounded vehicle, connect NEGATIVE (BLACK) clamp from battery charger to NEGATIVE (NEG, N, –) ungrounded
post of battery. Connect POSITIVE (RED) clamp to vehicle chassis or engine block away from battery. Do not connect clip to
carburetor, fuel lines or sheet-metal body parts. Connect to a heavy gauge metal part of the frame or engine block.
7. When disconnecting charger, disconnect AC cord, remove clamp from vehicle chassis, and then remove clamp from battery
terminal.
8. Do not charge the battery while the engine is operating.
9. See operating instructions for length of charge information.
Follow these steps when the battery has been removed from a vehicle
WARNING: A spark near the battery may cause an explosion. To reduce risk of a spark near the battery:
1. Check polarity of battery posts. The POSITIVE post (marked POS,P, +) usually has a larger diameter than the NEGATIVE battery
post (marked NEG, N, –).
2. Attach a 24-inch (minimum length) AWG #6 insulated battery cable to the NEGATIVE battery post (marked NEG, N, –).
3. Connect the POSITIVE (RED) battery clamp to the POSITIVE battery post (marked POS, P, + or red).
4. Stand as far back from the battery as possible, and do not face battery when making final connection.
5. Carefully connect the NEGATIVE (BLACK) charger clamp to the free end of the battery cable connected to the NEGATIVE
terminal.
6. When disconnecting charger, always do so in reverse sequence of connecting procedure and break first connection while as far
away from battery as practical.
BC1509_2509_4009_ManualENSP_032213.indd 6-7 4/30/2013 6:20:59 PM
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stanley BC4009 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stanley BC4009 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 1,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info