ENGLISH
RECORDING
Recording from Radio
- Set the FUNCTION switch (2) to the RADIO position.
- Tune in desired radio station.
- Open the Cassette Compartment Door (12) by pressing the STOP/EJECT
button (6) and insert a blank tape into the cassette compartment. Close the door
gently.
- Press the RECORD button (10) and PLAY button (9) simultaneously to start the
recording process.
- Press the STOP/EJECT button (6) when finished.
Note:
You may want to monitor playback during recording. You can adjust the sound
with the VOLUME control (1). This adjustment does not affect the content of
recording.
Recording from Built-in Condenser Microphone
- Set the FUNCTION switch (2) to the MIC position.
- Open the Cassette Compartment Door (12) by pressing the STOP/EJECT
button (6) and insert a blank tape into the cassette compartment. Close the door
gently.
- Press the RECORD button (10) and PLAY button (9) simultaneously to start the
recording process. This process will record the signals that are received by the
built-in Condenser Microphone (4).
- Press the STOP/EJECT button (6) when finished.
Note:
Monitoring during MICROPHONE recording is not possible.
Prevention Against Accidental Erasure
- To prevent a recording, e.g. side A, on the cassette tape from being erased
accidentally, break off the tab on the rear of the tape. Now, recording on side A is
no longer possible. If you wish to make side A recordable again, cover the hole
with adhesive tape.
SPECIAL FEATURES
Automatic Stop
- During playback or recording, the unit will shut itself off automatically at the end
of tape.
ENG 4
