Channel swap
You can change the channel number under which a channel is stored by swapping it with an-
other station. For example, if you have TV1 on Channel 3 and TV2 on Channel 1 you can swap
them over so that TV1 is on Channel 1 and TV2 is on Channel 3.
To exchange:
• Press the “MENU” button and press the “ ” button to select the TUNE, then press the
“ ” to enter to the Menu.
• Press the “
” button to highlight Program Swap.
• Press the “
” button enter to program Swap menu and press the “ ” button one
more time,then the Swap From will be highlighted. Use the numeric buttons or “ ”
button to input the desired program number you want to exchange, then press “MENU”
button.
• Press the “ ” button to highlight Swap To and press the “ ” button. Use the numeric
buttons or “ ” button to input the desired program number you want to exchange, then
press “MENU” button.
• Press the “ ” button to highlight Perform Swap and press the “ ” button to conrm
the exchange. The two channel numbers on the screen will swap places.
• Press the “MENU” button to exit.
Skipping Channels
If the tuning process has stored some channels that you do not use, these can be skipped so
that they do not appear when you use the program up and down buttons. The only way to view
a skipped channel is to use the numeric buttons to select the channel number.
• Press the “MENU” button and press the “
” button to select the TUNE, then press the
“ ” to enter to the Menu.
• Press the “
” button to select Program. then press “ ” button to highlight the
Program, then press the “ ” button or numeric button to select the desired program No.
which you want to Skip, then press “MENU” button.
• Press the “
” button to select Skip.
• Press the “
” button to select On or Off
• Press the “MENU” button to exit.
Fine Tune
Although the automatic and manual searches will attempt to tune to the best reception, in areas
of poor reception some ne tuning may be required.
To ne tune:
• Press the “MENU” button and press the “ ” button to select the TUNE, then press the
“ ” to enter to the Menu.
• Press the “
” button to select Manual Install, then press the “ ” button to manual
install menu.
• Press the “ ” button to select Fine Tune .
• Press either the “
” button to search up or down the wave band to get the best picture.
• Press the “
” button to select Manual Install, then press the “ ” button to enter
to Manual Install menu.
• Press the “ ” button to select Band.
then press the “ ” button to select VHF-L,VHF-H,UHF.
• Press the “ ” button to select Manual Search, then press the “ ” button to start
the Channel search.
• The search process will be shown on the screen. When a station is found, the search
will stop and the station will be displayed and stored under the selected Program number.
If you do not want this station stored under this Program number, press the “ ” button
again to continue the search.
•
If you want this station stored under this Program number to press “MENU” button the station
will stored automatically.
• You can then repeat the manual tuning process until all the stations you want are stored.
• Press the “MENU” button to stop Manual Search process.
