562115
6
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
Note :
Remove the stylus protector.
Be
sure that the tone arm is detached from the
ton
e arm rest before operation and re-secured
again afterward.
1.
Press the POWER switch to ON.
2. Set the FUNCTION switch to the
PHONO
3. Set the speed selector to the p
roper
position depending on the
record to be
played.
4. Place the
record on the platter (if
required, use the 45 rpm adaptor).
5. Lift the tone arm f
rom the rest and slowly
move
it to the edge of the record. The platter
will begin to
rotate.
6. Place the tone arm to the desired
position.
7. Adjust VOLUME & EXTRA BASS
cont
rols to the desired sound level and sound
equalization.
8. At the end of
record, the platter will
automatically stop
rotation. Lift the tone
arm
from the record and return it to the rest.
9.
To stop manually, lift the tone arm from
the
record , and return it to the rest.
5
PHONO
Inserting and Removing the Cassette
Tape
Open the cassette compartment lid by
pressing the STOP/EJECT button. Insert
the cassette placing the full
reel on the left
(visible th
rough the window) and the
exposed section of the tape at the bottom.
Close the compartment lid. Now the unit is
ready for operation. To use the second
track, p
ress the STOP/EJECT button and
remove the cassette. Turn the cassette
around and reinsert it as previously
described.
Recommended Cassette Tapes
In
order to obtain optimum performance with
the built-in cassette tape deck, it is essential
to use only high quality cassette tapes. The
bias and equalization of your tape deck is
adjusted to yield excellent
results if used
with brand name tapes. Use C-30, C-60
and C-90 cassettes only.
We do not
recommend C-120 cassettes because
they can be subject to mechanical instability
and p
roper constant tape tension cannot be
cont
rolled.
Checking the Cassette
Make su
re that the cassette tape has no
slack prior to inserting it into the
recorder.
Safeguard Against Accidental
Erasure
To protect valuable recordings from accidental
erasing,
the tape deck and the cassette are
eq
uipped with standard safety features. To
keep the recorded material carefully, break out
the tabs on the back of the cassette with a knife
or
screwdriver. To protect the side A (1) from
accidental erasure, break out the right side
tab
(2). To record on a cassette whose tabs
have
been broken, simply attach adhesive
tape
(3) over the tab opening. The REC button
will
not lock in position when a cassette tab
has been
removed.
CASSETTE TAPES
(1) SIDE A
(3) ADHESIVE
TAPE
(2)
TAB
Unless the tape is taut, it may wind around
the head mechanism and t
rouble may result.
Use a pencil as shown in the Figu
re to take
up slack on one of the
reels.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Soundmaster HCD 9933PR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Soundmaster HCD 9933PR in de taal/talen: Engels als bijlage per email.

De handleiding is 0,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info