164181
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
Sony Corporation 1996 Printed in Japan
XM-5026/4026
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
75␣ (55)* watts per channel minimum continuous average power into
4␣ ohms, both channels driven from 20 Hz to 20 kHz with no more than
0.04% total harmonic distortion per Car Audio Ad Hoc Committee
standards.
Other Specifications
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. XM-5026 Serial No.
Model No. XM-4026 Serial No.
Features
Rated power output of 50 (40)* watts per
channel (at 4 ohms, supply voltage at 12.5 V).
Rated power outputs of 75 (55)* watts per
channel (at 4 ohms, supply voltage at 14.4 V).
The XM-5026/4026 can be used as a monaural
amplifier with a maximum outputs of 440 (320)*
watts at 4 ohms (when used as a bridging
amplifier).
Dual mode connection possible a multi-speaker
system.
Protection circuit provided.
Pulse power supply** for stable, regulated
output power.
New circuit which removes the source
resistance from the final MOS FET output stage,
and drives the speaker directly.
* (XM-4026)
** Pulse power supply
This unit has a built-in power regulator which converts the
power supplied by the DC 12 V car battery into high speed
pulses using a semiconductor switch. These pulses are
stepped up by the built-in pulse transformer and separated
into both positive and negative power supplies before being
converted into direct current again. This is to regulate
fluctuating voltage from the car battery. This light weight
power supply system provides a highly efficient power
supply with a low impedance output.
Caractéristiques
Sortie nominale de 50 (40)* watts par canal (à 4
ohms, tension d’alimentation de 12,5 V).
Sorties nominale de 75 (55)* watts par canal (à 4
ohms, tension d’alimentation de à 14,4 V).
Le XM-5026/4026 peut être utilisé comme
amplificateur monaural avec une puissance
maximum de 440 (320)* watts à 4 ohms (avec un
amplificateur en pont).
Connexion double mode à plusieurs haut-
parleurs possible.
Circuit de protection fourni.
Alimentation par impulsions** pour une sortie
stable et régulée.
Nouveau circuit qui élimine la résistance source
de l’étage de sortie final MOS FET et commande
directement le haut-parleur.
* (XM-4026)
** Alimentation par impulsions
Le convertisseur intégré de cet appareil permet de
transformer l’alimentation en courant continu fournie par
une batterie de voiture de 12 volts en signaux ultra-rapides
grâce à l’interrupteur à semiconducteur. Ces signaux
peuvent être démultipliés par le transformateur intégré à
impulsions, séparés en courant positif et négatif avant
d’être de nouveau convertis en courant continu afin de
stabiliser la tension variable de la batterie de voiture. Le
système d’alimentation de faible poids fournit une
alimentation très efficace avec une sortie de basse
impédance.
3-858-867-11 (1)
Stereo power
Amplifier
Operating Instructions
Mode d'emploi
This instruction manual covers the XM-5026 and XM-4026. The
illustrations on the manual are of the XM-5026. When differences occur,
they are clearly described in the corresponding sections.
Ce mode d’emploi couvre les modèles XM-5026 et XM-4026. Les
illustrations représentent le XM-5026. Toute différence est clairement
indiquée dans les paragraphes correspondants.
Spécifications
Circuiterie Circuit OTL (Sortie sans
transformateur)
Alimentation par impulsions
Entrées Prises à broche RCA
Sorties Bornes de haut-parleurs
Impédance des haut-parleurs
1 – 8 ohms (stéréo)
2 – 8 ohms (utilisé comme
amplificateur en pont)
Sorties maximales 150 (110)* watts par canal (à 4
ohms)
220 (160)* watts par canal (à 2
ohms)
440 (320)* watts (monaural) à 4
ohms
Sorties nominales (tension d’alimentation de 12,5 V)
50 (40)* watts par canal (20 Hz –
20 kHz, 0,04 % THD, à 4 ohms)
75 (60)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 2 ohms)
75 (65)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 1 ohms)
150 (120)* watts (monaural) (20 Hz
– 20 kHz, 0,1 % THD, à 4 ohms)
Sorties nominales (tension d’alimentation de 14,4 V)
75 (55)* watts par canal (20 Hz –
20 kHz, 0,04 % THD, à 4 ohms)
110 (80)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 2 ohms)
110 (85)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 1 ohms)
220 (160)* watts (monaural) (20 Hz
– 20 kHz, 0,1 % THD, à 4 ohms)
Réponse en fréquence
5 Hz – 100 kHz (
-3
dB)
Distorsion harmonique
0,005 % ou inférieure
(à 1kHz, 4 ohms)
Plage de réglage du niveau d'entrée
0,2 – 4,0 V
Filtre passe-haut 80 Hz, – 12 dB/oct
Filtre passe-bas 50 Hz, 80 Hz, –18 dB/oct
Amplification de basses fréquences (XM-5026
uniquement)
0 – 10 dB (40 Hz)
Alimentation Batterie de voiture, courant
continu 12 V (masse négative)
Tension d'alimentation
10,5 – 16 V
Courant à la sortie nominale: 18 (13)* A
Entrée de télécommande: 1 mA
Dimensions Env. 181 × 62 × 360 (280)* mm
(l/h/p) (7
1
/4 × 2
1
/2 × 14
1
/4
(11
1
/8)* po.) capuchon de
protection de borne compris
Poids Env. 2,2 (1,6)* kg (4 li. 10 on.
(3 li. 8 on.)*) accessoires non
compris
Accessoires fournis Vis de montage (4)
Capuchon de protection de borne (2)
Accessoires en option
Cordon de connexion pour
amplificateur de puissance RC-46
Cordon à broche RCA RC-64 (2 m)
Cordon à broche RCA RC-65 (5 m)
*(XM-4026)
La conception et les spécifications peuvent être modifiées
sans préavis.
Circuit system OTL (output transformerless)
circuit
Pulse power supply
Inputs RCA pin jacks
Outputs Speaker terminals
Speaker impedance 1 – 8 ohms (stereo)
2 – 8 ohms (when used as a
bridging amplifier)
Maximum outputs 150 (110)* watts per channel (at 4
ohms)
220 (160)* watts per channel (at 2
ohms)
440 (320)* watts (monaural) at 4
ohms
Rated outputs (supply voltage at 12.5 V)
50 (40)* watts per channel (20 Hz –
20 kHz, 0.04 % THD, at 4 ohms)
75 (60)* watts per channel (20 Hz –
20 kHz, 0.1 % THD, at 2 ohms)
75 (65)* watts per channel (20 Hz –
20 kHz, 0.1 % THD, at 1 ohms)
150 (120)* watts (monaural) (20 Hz
– 20 kHz, 0.1 % THD, at 4 ohms)
Rated outputs (supply voltage at 14.4 V)
75 (55)* watts per channel (20 Hz –
20 kHz, 0.04 % THD, at 4 ohms)
110 (80)* watts per channel (20 Hz
– 20 kHz, 0.1 % THD, at 2 ohms)
110 (85)* watts per channel (20 Hz
– 20 kHz, 0.1 % THD, at 1 ohms)
220 (160)* watts (monaural) (20 Hz
– 20 kHz, 0.1 % THD, at 4 ohms)
Frequency response 5 Hz – 100 kHz (
-3
dB)
Harmonic distortion 0.005 % or less
(at 1kHz, 4 ohms)
Input level adjustment range
0.2 – 4.0 V
High-pass filter 80 Hz, –12 dB/oct
Low-pass filter 50 Hz, 80 Hz, –18 dB/oct
Low boost (XM-5026 only)
0 – 10 dB (40 Hz)
Power requirements 12 V DC car battery
(negative ground)
Power supply voltage
10.5 – 16 V
Current drain at rated output: 18 (13)* A
Remote input: 1 mA
Dimensions Approx. 181 × 62 × 360 (280)* mm
(w/h/d) (7
1
/4 × 2
1
/2 × 14
1
/4
(11
1
/8)* in.) include terminal
protect cover
Mass Approx. 2.2 (1.6)* kg (4 lb. 10 oz.
(3 lb. 8 oz.)*) not incl. accessories
Supplied accessories Mounting screws (4)
Terminal protect cover (2)
Optional accessories Connecting cord for power
amplifier RC-46
RCA pin cord RC-64 (2 m)
RCA pin cord RC-65 (5 m)
* (XM-4026)
Design and specifications are subject to change without
notice.
+0
+0
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony xm 5026 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony xm 5026 in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 0,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sony xm 5026

Sony xm 5026 Gebruiksaanwijzing - Deutsch, Italiano - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info