28640
44
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
44 (GB)
Troubleshooting
Others
Symptom
Cause
Remedy
The LAMP/COVER indicator
flashes.
The lamp cover or the air filter is
detached.
Attach the lamp cover or the air filter securely
(see
pages 41 (GB) and 42 (GB)).
The LAMP/COVER indicator
lights up.
The lamp has reached the end of its life. Replace the lamp
(see pages 41 (GB) and 42
(GB)).
The lamp has reached too a high
temperature.
The TEMP/FAN indicator
flashes.
The fan is broken.
Consult with qualified Sony personnel.
The TEMP/FAN indicator
lights up.
The internal temperature is unusually
high.
Check to see if nothing is blocking the ventilation
holes.
Check to see if the air filter is clogged with dust.
(Do not use an air filter for more than 500 hours.)
Warning messages
Use the list below to check the meaning of the messages displayed on the screen.
Message Meaning Remedy
High temp.!
Lamp off in 1 min.
Internal temperature is too high. Turn off the power.
Check to see if nothing is blocking the ventilation
holes.
Check to see if the air filter is clogged with dust.
(Do not use an air filter for more than 500 hours.)
Frequency is out of range!
This input signal cannot be projected as
the frequency is out of the acceptable
range of the projector.
Input a signal that is within the frequency range.
The resolution setting of the output
signal of the computer is too high.
Set the setting of output to XGA
(see page
17 (GB)).
Please check INPUT-A
setting.
You have input an RGB signal from the
computer when INPUT-A in the SET
SETTING menu is set to COMPONENT,
DTV YP
BPR or DTV GBR.
Set INPUT-A correctly
(see page 30 (GB))
.
Please check INPUT-B
setting.
You have input an RGB signal from the
computer when INPUT-B in the SET
SETTING menu is set to COMPONENT,
DTV YP
BPR or DTV GBR.
Set INPUT-B correctly
(see page 30 (GB))
.
The electrical system has failed.
Please replace the LAMP.
Replace the lamp.
Both LAMP/COVER and
TEMP/FAN indicators light up.
Wait for 120 seconds to cool down the lamp and
turn on the power again
(see page 22 (GB))
.
Consult with qualified Sony personnel.
Please replace the filter. The air filter is clogged with dust. Replace the air filter.
It is time to replace the lamp.
Remote Commander
Symptom
Cause
Remedy
The Remote Commander
does not work.
The Remote Commander batteries are
dead.
The remote control cable is not
connected to the CONTROL S IN
connector (projector) or CONTROL S
OUT (Remote Commander).
Replace with new batteries
(see page 15 (GB))
.
Connect the remote control cable to both the
projector and Remote Commander, or disconnect
the cable
(see page 15 (GB))
.
The front/rear remote control detector is
near a fluorescent lamp.
Change the setting of SIRCS RECEIVER in the
SET SETTING menu
(see page 30 (GB))
.
There are no batteries in the Remote
Commander.
Install batteries
(see page 15 (GB))
.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony VPLVW12HT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony VPLVW12HT in de taal/talen: Frans als bijlage per email.

De handleiding is 1,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sony VPLVW12HT

Sony VPLVW12HT Gebruiksaanwijzing - English - 148 pagina's

Sony VPLVW12HT Gebruiksaanwijzing - Espanôl - 148 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info