655956
50
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Safety provisions
ENGLISH 10
In addition to the safety provisions already listed, the following safety provisions also apply when working
with the motor device:
x Danger of poisoning! Once the engine is running, the power tool produces toxic exhaust that may be
invisible and odourless. Never start the power tool in closed rooms. Special danger also applies in
narrow situations, troughs or ditches. Only work here when it is absolutely certain that there is sufficient
air exchange and that no toxic gases may accumulate.
x Increased danger of fire! Do not smoke at the workplace – not even in the proximity of the power tool.
x Secure the workplace against accidental access by third parties, e.g. with warning signs. Only persons
involved and wearing adequate protective equipment and clothes must be present within 30 metres
[approx. 30 yards] around the working area.
x Check the site of deployment for possible dangers.
Spark formation during cutting means that work must never be performed close to potentially
explosive gases of liquids, or easily flammable objects.
No electrical lines, water or gas pipes or flammable substances must be placed in the area to be cut.
Objects that may fall off or topple over during work must be secured or removed from the working
environment first.
Prepare the workplace so that secure operator mobility is possible.
x The work piece to be cut must be free of foreign bodies such as screws, nails or stones.
x When working in residential areas, observe the noise protection provisions.
x Work carefully, considerately and calmly and do not endanger others.
Ensure good sight and light conditions.
Always remain within calling distance of other persons who may administer first aid in emergencies.
Schedule work breaks.
Be attentive towards possible danger sources and take the corresponding preventive measures.
Consider that use of hearing protection limits perception of sounds. Signal sounds, calls, etc. that
announce danger may also be missed.
Observe tripping dangers and obstacles. Never work on unstable grounds.
Always hold the power tool with both hands and always ensure a safe and firm stance.
Never cut standing on a ladder.
Guide the power tool so that no body part is located in the extended swivel range of the cut-off
wheel.
Do not hold the work piece in your hand and bring it into contact with the wheel.
Process only the work piece to be cut with the rotating cut-off wheel.
Never touch the floor or other objects with the cut-off wheel running.
Do not use the power tool to level off and shovel away objects.
x Switch off the engine when the power tool starts to behave noticeably differently.
x Danger of burns! Do not touch the muffler while it is still hot.
Danger of fire! Muffler radiates enormous heat.
Never put the hot power tool into dry grass or on flammable objects.
x Danger of hearing damage and burns!
Never work with defective muffler or without muffler.
3.9 During work
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solo 879-12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solo 879-12 in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 2,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info