535630
22
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
42 43
OPERATION
A Switching on/off
You can switch the unit on or off by pressing button A. This button is also used to reset the cleaning
indicator light (by holding down).
B Hygrostat (pre-set moisture level)
By pressing button B you can set the desired moisture level in %. A relative moisture of between 40 and
60% is recommended. The accuracy of measurement is +/- 5%. The unit will switch off when the moisture
level exceeds the desired setting. During selection the target value is displayed (symbol DESIRED). The
display will automatically show the current humidity value after a few seconds (symbol CURRENT).
C Timer
Using button C, the operation time can be set – adjustable between 1 and 8 hours, or continuous
operation (CO). Symbol G shows the operating period that has been set (1h/2h/3h/4h/5h/6h/7h/8h/CO).
The display will automatically show the current value after a few seconds.
D Controlling mist output and Evaporator output
By repeatedly pressing button D you can control the mist output. Symbol H shows which of the three
levels (low/medium/high) you have selected.
E Operation with pre-heating
Button E is used for switching the pre-heating on and off (symbol I lights up). As a result, the water
is pre-heated to a temperature of 80° C before entering the nebuliser space. It takes approx. 10 to 15
minutes for the water in the base to warm up. The mist now leaves the nebuliser space at a pleasant
temperature of 40° C. The advantage of this is that the room temperature does not drop and, in additi-
on, it significantly improves the water quality maintenance.
F Auto/Sleep Mode
The automatic and sleep modes can be activated by pressing button F. By pressing the button once, the
automatic function is switched on (symbol J appears on the display), maintaining the optimum humidity
subject to the temperature. Control takes place by means of output quantity and pre-set target value. If
the sleep function is switched on (the symbol K appears on the display), the target humidity is 50-65%;
the operation time is automatically set at 6 hours; the heating is switched on. In addition, the output
quantity is also controlled subject to the difference between the target value and the actual value.
The hygrostat and mist output settings cannot be changed in either mode. If the buttons B or D are
pressed, the unit will no longer be in auto or sleep mode.
G Timer Indicator
H Mist Output Indicator
I Pre-heating Indicator
J Auto Mode Indicator
K Sleep Mode Indicator
L Empty indicator
The transparent water tank makes it possible to see the water level well. Furthermore, the unit shows on
the display (L) when water must be added. Please read the chapter «Filling the tanfor more information.
The symbol L may stay illuminated for some seconds with a refilled tank until the base is filled with water.
M Cleaning indicator
If symbol M and «CLEAN» appear on the display, the appliance should be cleaned as recommended by
the manufacturer. This symbol comes on automatically every 2 weeks, depending on the level of use.
The display can be cancelled by depressing button A for between 10 and 15 seconds.
E
F
D
A
C
B
G
M
K
H
I
L
J
Solis_Digisonic_Betriebsanleitung.indd 42-43 27.05.10 09:58
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solis Type 7151 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solis Type 7151 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 10,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info