535612
17
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
E
32
33
E
INSTRUCTIONS FOR CLEANING
IMPORTANT: Always unplug the appliance
before cleaning the MAGIC VAC
®
.
Carefully wash your hands before proceeding
to clean the appliance and its accessories.
Both before and after use, clean the exposed
surfaces of the MAGIC VAC
®
using a sponge
moistened with a mild, non-abrasive dishwas-
hing detergent. If any liquids accidentally get
inside the appliance, do not connect it to the
mains electricity supply and do not use it;
contact your nearest dealer or authorised
service centre.
The appliance is provided with a lower part (13)
which is entirely removable and washable also
on the dishwasher top rack (fig. S). Before was-
hing the lower part, remove both gasket (10)
(fig. T) and sealing gasket (11) (fig. U). Clean
both gaskets using a sponge moistened with a
mild washing up liquid and leave them to com-
pletely dry before positioning them again. Once
cleaning and drying are over, carefully fit both
gaskets back in their places. Then reinsert the
lower part (13) in the port provided on the lid
(5).
Thoroughly wash the MAGIC VAC
®
accessories
(containers, caps, jars, etc.) like you would wash
any kitchen utensils, allowing them to
dry completely. If you wash the accessories
in a dishwasher, be sure to place them on
the top rack.
TROUBLESHOOTING
The MAGIC VAC
®
does not work
Check the switch (1) position.
Make sure the MAGIC VAC
®
has been plugged
in properly. Check the electric socket by plugging
another appliance into it.
The MAGIC VAC
®
will stop automatically if
overheated. Allow it to cool down for 15 minutes
and try again.
Check for faults in the power cord or the plug.
Should you detect a fault, do not use the
appliance.
The MAGIC VAC
®
fails to apply the first seal
on the bag cut from the roll
Make sure the bag cut from the roll is
properly positioned as described in the para-
graph: „Making bags from MAGIC VAC
®
rolls“
The MAGIC VAC
®
does not create a complete
vacuum in the bags
To seal the bag properly, you must make sure
that the open end remains completely inside the
Vacuum Chamber.
Make sure that the Sealing Bar, the Sealing
Gaskets and Airtight Gaskets are free of impuri-
ties. After cleaning them, put them properly
back in place.
The MAGIC VAC
®
bag might have a hole in it.
To check it, seal the bag with air on the inside.
Dip the bag in water and apply pressure. The
appearance of bubbles means that there is a
leak. Reseal or use another bag.
The MAGIC VAC
®
does not seal the bag
properly
If the Sealing Bar overheats and melts the bag,
you may have to raise the Lid and allow the
Sealing Bar to cool down for a few minutes.
The MAGIC VAC
®
is built in conformity with
current safety standards. Overheating will cause
it to turn off automatically. Allow the appliance
to cool down for 15 minutes and try again.
The MAGIC VAC
®
bag does not maintain a
vacuum after being sealed
Leaks along the seam may be caused by creases,
crumbs, grease or liquids. Reopen the bag, clean
the upper inside part of the bag and remove
any foreign material from the Sealing Bar before
resealing it.
Check that the bag has no holes in it which have
caused air to leak in. Use paper napkins to pro-
tect any sharp edges on the contents of the bag.
The MAGIC VAC
®
does not create a vacuum
in the containers
By means of the Connection Hose, connect the
container lid (or the Cap Attachment if neces-
sary) to the Air Inlet of the appliance.
Leave enough room (at least 3 cm) between the
contents and the top of the jar or container.
If liquids come out during the vacuum-packing
process, remember that they must first be chilled
in a refrigerator, not left at room temperature.
Check that the rim of the jar or container and
the universal lid are not damaged in the sealing
area. Wipe the rim and cap clean with a cloth
moistened with lukewarm water and repeat the
vacuum-packing process.
Make sure that the gasket of the container cap
or the universal cap is set properly in place and
is not damaged.
MAGIC VAC
®
Executive
containers or
MAGIC VAC
®
Universal Caps do not maintain
a vacuum
Make sure that the arrow on the knob of the
container cap is positioned on „VACUUM“
before creating a vacuum in the container and
it is positioned on „CLOSED“ after a vacuum
is formed.
Make sure that the O-ring beneath the knob
of the container cap or the universal cap is set
properly in place.
MAGIC VAC
®
Family
containers do not
maintain a vacuum
Make sure that the gasket beneath the central
button (17) of the container cap is set properly
in place and is not damaged.
packing cycle and turn off automatically on its
completion.
Disconnect the hose from both the Bottle Cap
and the appliance immediately.
To open a bottle sealed with the MAGIC VAC
®
Bottle Cap, simply pull the cap out of the bot-
tle. You will hear the air rushing into the bottle.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solis Futura bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solis Futura in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info