718540
25
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
TROBLESHOOTING:
Troble Causes Soultion
Top thread broken
1.Improper top threading.
2.Excessively tight top tension.
3.Blunt or bend needle.
4.Improper xing of needle.
5.At start of sewing, top thread and bottom thread
are not correctly xed beneath the presser.
6.The thread is unsuitable
1.Threading the top thread again.
2.Adjust the top tension.
3.Replace the needle.
4.Reinstall the needle.
5.Proper operation.
6.Replace the proper thread.
bobbin thread broken
1.The bobbin thread is not correctly threaded
into
bobbin case.
2.Cotton ock collected on shuttle race.
3.The bobbin is damaged and impossible to smooth-
ly rotate.
Thread the bobbin thread again.
Clean the shuttle race.
3.Replace the bobbin.
Needle broken
1.Improper xing of needle. 2.Blunt or bend needle.
3.The needle clamp screw is loosening. 4.Excessive-
ly tight top tension.
5.Too thin needle.
1.Reinstall the needle.
2. Replace the needle.
3.Tight the needle clamp screw.
4.Adjust the top tension.
5.Replace the proper needle.
Skipping stitches
1.Improper xing of needle.
2.Blunt or bend needle.
3.The needle and (or) thread is unsuitable for the
used fabric.
4.Improper top threading.
5.The needle is unsuitable.
1.Reinstall the needle.
2.Replace the needle.
3.Replace the proper needle and thread.
4.Threading the top thread again.
5.Replace the proper needle.
Seam puckering
1.Excessively tight top tension.
2.Improper top threading.
3.Excessively thick top thread for the used fabric.
1.Adjust the top tension.
2.Threading the top thread again.
3.Replace the proper thread.
Unsmooth feed
1.Feed dog is wound by thread.
2.Thread jams.
1.Clean the feed dog.
2.Clean the clamping thread.
Not run of machine
1.Not surely inserting power plug.
2.Clamping thread at shuttle race.
3.Failure to replace the bobbin winder shaft at origi-
nal position after winding bobbin.
1.Check the power connector.
2.Clean the clamping thread.
3.Push the bobbin winder shaft to original
position.
Thread jaming
1.The presser foot lifter is not lower down when
sewing.
2.Improper top threading.
3.Improper bobbin threading.
1.Lower down the presser foot lifter.
2.Threading the top thread again.
3.Threading the bobbin thread again.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solac SW8240 - Cotton 24.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solac SW8240 - Cotton 24.0 in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 7,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info