619725
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
5 • UK
User Tip: Calorie burn can only be calculated if your SR200 knows your height, weight and age, so please enter this information
in the settings section of your SR200. This user information needs to be set before you begin any training sessions, otherwise
an accurate calorie burn cannot be calculated.
TIME: Displays the time.
Setting RUN mode sub-views
You can set your SR200 to display different combinations of information over 3 lines at the same time.
Chronograph will always be displayed on line 1, but you can you change the data displayed on both lines 2 and 3. For example, you
can set your SR200 to display CHRONO, PACE and CALORIE burn at the same time or CHRONO, CALORIE burn and CLOCK at the same
time.
Changing data displayed on lines 2 and 3.
You can select which two pieces of data you want displayed on your SR200 at any time during a training session. You do this by using
the S3 button in two different ways.
Launch RUN mode in the normal way, and press S1 to start your training session.
Press S5, briefly, to change the data type displayed on line 3. Keep pressing S5 to choose between SPEED, CALORIE, CLOCK,
CHRONO, DISTANCE or PACE. Each time you press S5, the data type displayed will appear briefly to confirm your selection.
To change the data type displayed on line 2, press and hold S5 until the data type changes. Keep pressing and holding S5 to
choose between SPEED, CALORIE, CLOCK, CHRONO, DISTANCE or PACE
You can change the data displayed on either line at any time during your training session.
How to view your RUN data
When you have finished a training session press S1 to stop. The chronograph will stop, your SR200 will stop recording data and STOP
will flash on the screen. To immediately view the data collected during this session, press S5 before saving. The following information
will be displayed:
Stop/ Chrono/ Distance
Calorie/ Ave Pace/ Max Pace
Calorie/ Ave Speed/ Max Speed
To save this session, press and hold S1 for approx 3 seconds.
User Tip: When the chronograph is stopped or reset, if there is no key operation for 15 minutes, the GPS will automatically turn
off and your SR200 will return to TIME mode.
How to enter and use DATA mode
Press S7 to scroll through the main modes to DATA mode. Your SR200 will momentarily display DATA, then the latest data file
saved. If there is no data available, it will display DATA. ----
If you want to view the data from other saved training sessions, press S1 to scroll through the data files previously saved. Note: A
maximum of 30 files, with 100 laps in each file, can be saved.
Next, press S5 to enter the selected file. Your SR200 will display the start time, end time and distance.
Press S1 or S5 to scroll forwards through the data saved for each session. You will be able to view the following information:
» Start, end time & distance.
» Chrono, calorie & distance.
» Chrono, max pace & ave pace.
» Chrono, max speed & ave speed
» Lap 1 time & distance
» Lap 2 time & distance
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Snooper SR200 GPS Sport watch bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Snooper SR200 GPS Sport watch in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info