490931
7
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
GB
Congratulations on the purchase of this SkyTec mixer.
Please read this manual carefully prior to using the unit.
Warning:
- Read the manual prior to using the unit.
- Keep the manual for future reference.
- Keep the packaging for safer transport in its original packaging
- For indoor use only.
- Prior to the first use, have the unit checked by a qualified person.
- The unit contains voltage carrying parts. DO NOT open the mixer.
- When you unplug the unit from the mains always pull the plug, never the lead.
- Never plug or unplug the unit with wet hands.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a
mains outlet.
- Repairs and lamp replacement has to be carried out by a qualified technician.
- Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.
- Do no place the unit near heat sources.
- Always unplug the unit during a thunderstorm or when it is not in use.
- If the unit has not been used for a longer period of time, condensation can occur inside the
housing. Please let the unit reach room temperature prior to use.
- Keep out of the reach of children.
- All channel controls and the master volume control must be set to zero prior to switching the
unit on.
- To prevent clipping of the amplifier do not set the volume level too high.
- Switch the amplifier on at latest and switch it off at first.
- Do not use cleaning sprays for the slider controls. The residues of these spray cause dust
deposits in the controls. If a problem occurs, please consult a specialist.
GENERAL DESCRIPTION
The TEC-450 Stereo Pro mixer features six input channels, fitted with a 3-band frequency control and
switchable between LINE, PHONO and MIC. The MASTER output features a slider control with a
signal strength meter via LEDs allowing an accurate setting of the signal level to the amplifier. The
built-in stereo headphones amplifier can be assigned to any input channel and features a separate
volume control. The TEC-450 mixer has a built-in 230V power supply. The unit can be used free
standing or rack mounted. Connect the mixer only to a 230Vac/50Hz mains outlet. For indoor use
only. Do not attempt to repair the unit yourself (except for the replacement of the crossfader). Repairs
should only be carried out by a qualified repair service.
CONNECTIONS AND SETTINGS
CHANNELS 1 TO 6
The channels 2 to 6 are totally identical. Channel 1 features in addition a TALKOVER function. The
inputs are suitable for a CD player, a turntable or a microphone. The RCA sockets (35) for CD player
(LINE) and turntable (PHONO) are located at the rear panel. The microphone input (1) is a combined
6.3mm/XLR jack and located on the top of the panel. Every channel is fitted with a selector switch for
PHONO, LINE or MIC (2), a GAIN control for the input sensitivity (3), a 3-band tone control (4/5/6), a
sound level slider control (8) and an EFFECT control (7).
SOUND LEVEL SETTING
Set the VU-meter (16) to PFL via the MASTER/PFL switch (17) and select the channel to be set via
the PFL switch (10). Set the GAIN in such a way that the level on the VU-meter displays about 0dB.
Set the tone control as required. If necessary re-adjust the GAIN again so that the VU-meter display
once again about 0dB.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skytec TEC 450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skytec TEC 450 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info