506100
3
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
GETTING STARTED
1. Remove speakers, power cable and the speaker cables from the carton.
2. Detach the modules from the speakers. By pressing and sliding the button on the top of the speakers you will
release the module from the speaker. All that is required is a little lift on the module once the button is pressed.
3. If you have purchased speaker stands, you can place the speakers on the stands utilizing the pole mount adaptor
built into the speaker cabinets. Once the speaker is on the pole, tighten the set screw to snug the speaker to the
pole.
4. Connect the Mixer Module to the Speakers
On the right side of the mixer you will notice two ¼" phone jacks – these are your speaker output jacks. Take the
speaker cables and connect them from these jacks to the jacks on the back of the speakers.
5) Connecting the AC Power Cable
Connect the female end of the power cable to the mixer and plug the male end into the wall socket or extension
cord. Turn the “MASTER VOLUME” control to “0”. Now turn the power switch to the “on” position. You should see
the “POWER” indicator illuminated. At this point you are ready to bring in an audio signal and hear the signal
amplified by the system.
, Brass or
Strings
EFFECT MENU
Getting Acquainted with the Powered Mixer
This part of the system houses the mixing board and power amplifier. You will connect all of the microphones,
musical instruments, external sound sources (like MP3 or CD players), headphones in addition to any recording
devices or additional speakers like a personal monitor, subwoofer or “Front of House” feed.
The Basics
While it looks complicated, the mixing board is actually a very simple device. A “mixing board” brings audio sources
“in” (through the inputs) and routes the signal to the outputs (MASTER VOLUME/SPEAKER OUTPUTS or
MONITOR OUTPUTS)). The mixer controls enable the user to affect the tone and/or volume in addition to routing
the signal and adding effects to individual input sources. The abundance of knobs is simply due to the repetitive
nature of the design.
AUDIO INPUTS
The system has 8 inputs: 4 mono inputs and 2 stereo inputs.
All of the inputs will route to the speakers and to the MONITOR OUTPUT SECTION.
MONO MIC/LINE INPUTS
There are 4 identical input strips comprised of a “peak LED”, a combination input connector, MIC/LINE selector,
Treble and Bass controls, an Effect and a channel volume control.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skytec Portable Soundset 10 inch MP3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skytec Portable Soundset 10 inch MP3 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info