490938
3
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
54-CHANNEL DMX CONTROLLER
Ref. no. : 154.050
INSTRUCTION MANUAL
General description
This compact DMX controller can control 54 channels in total which are spread over 9 groups
(projectors) with a maximum of 6 channels per group. The outgoing DMX addresses are pre-set to:
Projector 1 : addresses 1 to 6; Projector 2: addresses 7 to 12, etc. You only need to set the
appropriate start address on the connected equipment , i.e. 1, 7, 13, 25 etc. There are 6 functions
max. per start address available. This SkyTec DMX controller has a built-in memory for 9 different
programs of 50 steps each (scenes) allowing automatic control of different light effects. In each of
these scenes (steps) you can determine a combination of settings for the position of the mirror, the
light colour or the light intensity. When you run these steps in sequence, the connected disco light
effects produce the requested light pattern.
Connection
Connect the controller to the disco light effects (projectors or dimmer packs) via XLR leads. Set the
correct DMX start addresses on the connected units. Example: You have two DMX projectors and 3
DMX dimmer packs. Set the DMX addresses on these units to 1, 7, 13, 19 and 25.
Plug the mains adapter into the socket on the rear side and into a mains outlet. Switch the controller
on via the power switch at the rear side. A short confirmation signal is heard and the controller runs a
short test program after which the displays shows 0000.
Set up
The SkyTec DMX controller offers the possibility to couple the signals of the outgoing channels i.e. a
projector which is connected to group 3 (address 13) can run in a program that is controlled by group 1
(projector 1 on address no. 1). Keep the SELECT button pushed in until the message SET is
displayed. Once this message has disappeared after 4 seconds, you can select via the UP/DOWN
buttons the number of the light effect that you wish to couple. The selection is activated by pressing
the INSERT button. The SCENE display shows ON. Press the DELETE button to switch this function
off. OFF is now displayed. Shortly press the SELECT button to leave the set up mode.
Manual Operation
You can operate the connected light effects manually via the slider controls 1 to 6. Shortly press the
PROGRAM button until the display shows 0000. Push now the ‘PROJECTOR’ button. The displayed
figure becomes a ‘1’ with a dot next to it. This dot means that you can change the setting. Select the
required unit via the buttons ‘UP’ and ‘DOWN’. Set the light effect via the slider controls. Depending on
the connected light effect units, these controls allow you to set 256 steps on all used channels. It can
be the position of a mirror, a colour or the light intensity of a running light. To switch the manual
operation off, push the PROJECTOR button until 0 is displayed again.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skytec 54 kanaals DMX controller bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skytec 54 kanaals DMX controller in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info