480091
9
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
9
Do not use charger when cord or plug is damaged; cord
or plug should be replaced immediately at one of the
ocially registered SKIL Service Stations
Do not disassemble charger or tool
EXPLANATION OF SYMBOLS ON TOOL/CHARGER
3 Read the instruction manual before use
4 Do not expose tool/charger to rain
5 ! After switching o the tool the blade continues
to move for a few seconds
6 
 (keep bystanders a safe distance away from work
area)
7 Only use the charger indoors
8 Double insulation (no earth wire required)
9 Automatic shut-o when charger gets too hot (thermic
fuse blows and charger becomes useless)
0 Incorrect polarity of the charger connection could cause a
hazard (only charge the battery with the charger supplied)
! Do not dispose of the charger together with household
waste material
@ Do not dispose of the battery together with household
waste material
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
If for any reason the old plug is cut o the cord of the
charger, it must be disposed of safely and not left
unattended
Do not connect the blue (= neutral) or brown (= live) wire
in the cord of the charger to the earth terminal of the plug

Charging battery #
- battery of new tools is not fully charged
 


IMPORTANT:
- while charging, the charger and the battery may
become warm to touch; this is normal and does not
indicate a problem
 



- connect charger B with both wall socket and contact C
- charging light D turns on indicating that the tool is
being charged
- when the battery is fully charged, charging light D
turns o (after 4-6 hours)
- the lithium-ion battery can be charged at any time
(interrupting the charging procedure does not damage
the battery)
- the lithium-ion battery does not have to be empty
before charging (no “memory-eect” as with
nickel-cadmium batteries)
- if you anticipate long periods of non-use for the tool, it
is best to unplug the charger from its power source
Battery protection
Switches o the tool automatically when
1) the battery temperature is not within the allowable
operating temperature range of -10 to +60°C
2) the lithium-ion battery is nearly empty (to protect
against deep discharge)
 


On/o safety switch $
Prevents the tool from being switched on accidentally
- switch on tool by rst pressing safety switch E 2 and
then pulling trigger switch F 2
- switch o tool by releasing trigger switch F
- move tool away from cutting area before switching o
 

Changing blades %
 
- turn tool upside down
- push release button G
- slide protective cover H in same direction as arrow
printed on cover and lift it from the housing
 


- lift blade J or K out and mount required blade as
illustrated
- position protective cover H back and slide it towards
the blade until it snaplocks
Holding and guiding the tool
 
^
- maintain a stable working position
- keep your other hand away from the cutting blades
Trimming hedges &
- trim the sides of the hedge rst (from the bottom
upwards), then cut the top
- trim the side of a hedge in such a way that it will be
slightly narrower at the top
- use a hand saw or pruning shears to cut thicker
branches
- shrub shear blade K as well as grass shear blade J
can be used for trimming hedges
Trimming grass and shrubs *
- when cutting long grass, work in stages from the top
and take small cuts
- for optimal cutting results, only cut dry grass
- keep the tool away from solid objects in order to
protect the cutting blades against excessive wear
- grass shear blade J can also be used for trimming
shrubs

For trimming a hedge at a uniform height level
- fasten a piece of string along the length of the hedge
at the desired height
- trim the hedge just above this string
Recommended cutting/trimming times (Western Europe)
- trim hedges with deciduous leaves in June and
October
- trim evergreen hedges in April and August
- trim conifers and other fast-growing shrubs every 6
weeks from May until October
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 0755 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 0755 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 9,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info