591145
5
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
5

Hand mower 0720
INTRODUCTION
This product is intended for domestic lawn mowing only
! do not use the hand mower to cut grass on roofs
or balconies
Check whether the packaging contains all parts as
illustrated in drawing 2
When parts are missing or damaged, please contact
your dealer
TECHNICAL SPECIFICATIONS 1
TOOL ELEMENTS 2
A Push bar
B Cutting blades
C Foldable grass collector
D Holding belt
E Wing nut for adjusting mowing height
F Screw for adjusting bottom blade
G Bottom blade
SAFETY
Read this instruction manual carefully before use and
save it for future reference 3
Take care when transporting the mower to the lawn, as
the cutting blades are sharp
Always wear long trousers when mowing
Do not operate the mower when barefoot or wearing
open sandals
Thoroughly inspect the area where the mower is to be
used and remove all hard objects which could be caught
up and thrown by the cutting mechanism
Always ensure that the cutting mechanism is in good
working order (have worn or damaged parts replaced)
Keep all nuts, bolts and screws tight to be sure that the
mower is in safe working condition
Only mow with sucient daylight or with appropriate
articial lighting
Never mow in the direct vicinity of persons (especially
children) and animals
• Always keep hands and feet away from rotating parts
Operate the mower at a walking pace only (do not run)
Keep proper footing on slopes and do not mow extremely
steep slopes
Be extremely careful when moving backwards or pulling
the mower towards you
Never leave the mower unattended
Never let children or other persons who are not familiar
with the operating instructions use the product
USE
Assembly instructions 4
- the sequence of the numbers appearing in the drawing
corresponds with the sequence of the steps to be
followed for assembling the hand mower
! firmly tighten all screws and nuts
Adjusting cutting height (12 - 44 mm) 5
! wear protective gloves
- place the mower on a rm, at surface
- loosen both wing nuts E
- lift the housing in the center to the required
cutting height
- adjust the cutting height so that bottom blade G has no
ground contact if there are uneven areas on the
lawn surface
- tighten both wing nuts E
! ensure that wing nuts E are adjusted at the same
height on both sides
Operating instructions
- hold the mower with both hands
- place the mower on the edge of the lawn and mow in a
forward direction
- reverse at the end of each turn, slightly overlapping the
previous cut strip
- only use the mower on dry grass
- keep the mower away from hard objects and plants
- for mowing long grass, rst set the cutting mechanism
to
the maximum cutting height, then to a lower
cutting height
- adjust bottom blade G when the grass is not cut
cleanly and evenly
Adjusting bottom blade 6
! prevent entrapment of the fingers between
moving cutting blades and fixed parts of the
mower
! wear protective gloves
- turn the mower upside down
- adjust bottom blade G to the required position by
loosening/tightening both adjustment screws F
- the adjustment is correct, if a piece of paper inserted
between cutting blades B and bottom blade G is cut
sharp like through a pair of scissors (to do this
carefully rotate the blade cylinder by hand)
MAINTENANCE / SERVICE
Clean the mower after each use with a hand brush and a
soft cloth
! do not use water (especially no high-pressure
sprays)
- remove compacted grass cuttings from the blade area
with a wooden or plastic implement
Lubricate the cutting blades regularly to avoid oxydation
Regularly check for loose or damaged cutting blades,
and worn or damaged components
The mower is equipped with self-sharpening
cutting blades
! be aware that the self-sharpening function does
not work, when bottom blade G is not correctly
adjusted (see 6)
When necessary, take the mower to your dealer to have
the cutting mechanism sharpened
Store the mower indoors in a dry place
Do not place other objects on top of the mower when stored
If the appliance should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 0720 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 0720 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info