701694
4
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
4

LED Worklight 0320
INTRODUCTION
The worklight is intended for
illumination in dry indoor areas
This appliance is not intended for
professional use
Check whether the packaging
contains all parts as illustrated in
drawing 6
When parts are missing or damaged,
please contact your dealer
Read this instruction manual carefully
before use and save it for future
reference 2
TECHNICAL DATA 1
Dimensions (width x depth x height) :
18.5 x 21.8 x 27.5 cm
Material shielding glass : tempered glass
APPLIANCE ELEMENTS 6
A Wing nut for assembly/xation
B Lamp head
C Stand
D Wing nuts for adjusting lighting angle
E Shielding glass
SAFETY
• Handletheworklightwithcare
• Donotdirectthelightbeamat
personsoranimalsanddonot
stareintothelightbeamyourself
(notevenfromadistance)
Donotcoveroffthelamphead
whileoperatingtheworklight (the
lamp head heats up during operation
and can cause burns when the heat
accumulates)
Replace damaged shielding glasses
before using the worklight again
If the power cord is damaged, send
the worklight to a SKIL service station
(addresses are listed on www.skil.
com)
EXPLANATION OF SYMBOLS
2 Read the instruction manual before
use
3 Do not stare into the light beam
4 Replace a cracked shielding glass
5 Do not dispose of the worklight
together with household waste
material
WHEN CONNECTING NEW 3-PIN PLUG
(U.K. ONLY):
Do not connect the blue (= neutral) or
brown (= live) wire in the cord of this
appliance to the earth terminal of the
plug
If for any reason the old plug is cut o
the cord of this appliance, it must be
disposed of safely and not left
unattended
USE
Assembly 6
! ensurethattheplugis
disconnectedfromthepower
sourcebeforeassemblingthe
appliance
- rst unscrew wing nut A
- assemble lamp head B on stand C
with wing nut A as illustrated
- lock the worklight in place by
tightening wing nut A
Operating the appliance 6
- connect plug to power source
! connectthisearthedappliance
onlytoaproperlyearthed
powersupplysystem;ensure
thatsocketandextensioncable
haveafunctionalprotective
conductor
- the worklight is continuously
horizontally adjustable within its
pivoting range
- lock the worklight in place by
tightening wing nut A
- tilt the worklight into the desired
angle by loosening/tightening both
wing nuts D
MAINTENANCE / SERVICE
This appliance is not intended for
professional use
Clean the appliance with a dry or
slightly moist cloth (do not use any
abrasive or solvent-based cleaners)
! disconnecttheplugbefore
cleaning
The light source of this appliance
cannot be replaced (if the LED-light
reaches the end of its service life after
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 0320 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 0320 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info