18
auto-detect and display the SSID of wireless
network connected in this box (it displays
default initially). This default setting will let
the camera connect to ANY access point under
the infrastructure network mode.
To connect the camera to a specific access
point on the network, please make sure to set
the SSID of the camera to correspond with the
access point’s SSID for communication. Type
any string up to 32 characters long (spaces,
symbols, and punctuation are not allowed) in
the Network Name box.
To connect the camera to an Ad-Hoc wireless
workgroup, make sure to set the same wireless
channel and SSID to match with the
PC/Notebook’s configuration for direct wireless
communication.
• Wireless Channel: This pull-down menu
provides the wireless channel for
communication. A "channel" is a range of
frequencies to be used in communication
between the camera and access point in
Infrastructure mode, or the camera and
PC/Notebook in Ad-Hoc mode. Select the
appropriate channel from the list provided
depending on the regulatory region where the
unit is sold. The default setting is at channel
11.
• Transmission Rate: Select the data transmit
rate from this pull-down menu. The default
setting is Fully Automatic.
- WEP Encryption
• WEP Encryption: Wireless network
communications can be intercepted easily.
