484261
137
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Satellite Receiver SSR 1080 B2
English - 135
the [Green] (38) button to delete one character. As soon as you see the desired channel press the [Yellow] button (23) to skip to the left window
where you can select the channel.
Displaying Subtitles
Some programmes are broadcast with subtitles, for instance for the hearing-impaired or in different languages. Press SUB (38) to open the subtitle
selection. Note: DVB subtitles are rarely broadcast and differ from common Teletext subtitles.
Teletext
Many channels broadcast additional information and services. Teletext pages are like “electronic magazines” allowing you to view news, sport,
weather information, special offers and much more. The availability and content depends on the channel provider. The start or Index page is always
page 100. On this page, you will find an overview of the other pages. Press the TEXT button (22) to launch the Teletext view. To enter a page number,
always use 3 digits on the numeric buttons (20) or use the coloured special function buttons (22, 23, 38 and 39). The function currently assigned to
these control buttons appears at the bottom of the Teletext window. Pressing the STATUS button (32) several times changes the transparency of the
Teletext window. Press EXIT (24) to exit the Teletext pages.
Sleep Timer
You can use the SLEEP button (23) to set an automatic power off countdown. Pressing the SLEEP button (23) several times changes the countdown or
disables the sleep timer. The following options are available: “10 min”, “20 min”, “30 min”, “1 Hour”, “1 Hour 30 min”, “2 Hour” and “Off”.
Troubleshooting
No signal
No signal is shown on the device or on the OSD menu signal indicators.
1. First check the antenna cable: The braided lead of the external wire and the aluminium film must have good contact with the F connector and must
not touch the inner (centre) wire!
2. Check the reception settings and edit them if necessary. To further locate the problem we recommend that you temporarily connect the LNB directly
to the receiver and do not use any switches or splitters.
Functional fault
1. The device shows the wrong broadcasting times in the EPG or shows the wrong time. Once powered up, the satellite receiver needs to read and
process the channel data. Depending on the transponder, this can take some time. Sometimes it may be necessary to re-open the EPG or to
change the channel.
2. The device fails to respond. Unplug the power cord or switch the device off using the main power switch (16). Wait several seconds and reconnect
the device to try again.
Small number of channels
1. Make sure that you have enabled the correct Channel List. Press the OK/ENTER button (25) to open the programme list. The first line shows the
channel list currently selected. To select a different channel list, press the [Red] button (39). Press or navigation buttons (26) to select the
desired channel list and press the OK/ENTER button (25) to confirm. To obtain the entire channel list, select the “All TV” or “All Radio” group and
press the OK/ENTER button (25) to confirm. To close the group and channel list, press the EXIT button (24) as many times as necessary to hide all
windows.
2. The antenna has been moved to the wrong satellite. When positioning the antenna you may receive satellite broadcasting on similar frequencies
which causes the signal indicators on your satellite receiver to go up. When you switch channel, suddenly foreign channels or the message “No
Signal!” appear. Normally, you just need to move the antenna a few degrees East or West to receive the channels you want.
No sound, distorted sound
1. If there is no sound or only interference, your TV set or AV receiver may not be capable of decoding Dolby Digital/AC3 audio via the HDMI port.
Solution: Press the AUDIO button (39) to select Stereo sound. If the channel does not transmit stereo sound, connect the digital S/PDIF audio
output (9) to your Surround/AC3/Dolby Digital sound system.
2. If there is no sound, check whether the MUTE function has been enabled. If the sound is muted, press the MUTE button (17) again to resume the
sound output.
3. If the sound is very low or there is no sound at all, double-check the volume setting and, if necessary, increase the volume via the navigation
button (26). Please also check the volume setting on your TV set or your hi-fi amplifier, if one is connected.
137

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SSR 1080 B2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SSR 1080 B2 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 10,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info