739818
34
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
34 GB
After use, switch off the shiatsu cushion by
pressing the On /Off button
5
.
Back massage:
Select with button A+B
7
, A
8
or B
9
the
area you would like to have massaged:
A+B: your whole back
A: upper back
B: lower back.
The LED lamp signalises the massage area that
has been set.
Note: When you select the massage area, the
automatic switch-of will be activated and set at
15 minutes.
Press the timer button
10
, employing the appro-
priate frequency, to set the automatic switch-off
at 5, 10 or 15 minutes.
Note: by resetting the timer setting, the timer will
begin counting anew. At the beginning of the
massage, select the maximum duration of the
massage and do not change this during the
massage in order to prevent the shiatsu cushion
from overheating.
Note: Ensure that you are experiencing the
massage as pleasant and relaxing. If necessary,
vary the pressure and/ or your position. Stop the
massage at once if it is painful or unpleasant.
Heating function:
Press the heat button
6
, to activate the heating
function.
Press the heat button
6
once again to deacti-
vate the heating function.
Note: The heating function cannot be activated
unless a massage program has been previously
selected.
Seat vibration:
Press the seat vibration button
11
to activate
the seat vibration. The vibration starts at a low
intensity and the relevant LED for seat vibration
will light up.
Press the seat vibration button
11
, with the
appropriate frequency, to switch to low,
medium or high intensity or to deactivate the
seat vibration.
Note: The seat vibration can be activated
together with the back massage. However, the
vibration intensity will be slightly reduced in
this case.
Demonstration:
Press the Demo button
12
to have the functions
of the shiatsu cushion demonstrated to you.
Troubleshooting
Problem
Cause
Rectification
Massage heads rotate slower and slower.
Too much pressure on massage heads.
Relieve pressure on massage heads.
Massage heads do not move.
shiatsu cushion is not connected to the mains
supply.
Insert the plug and switch on the cushion.
shiatsu cushion is not switched on.
Switch on the shiatsu cushion by pressing the
On /Off button
5
. Select the massage area.
The transportation lock has not been removed.
The massage mechanism is damaged.
Contact your specialist dealer or the service ad-
dress.
Cleaning and Care
DANGER TO
LIFE BY ELECTRIC SHOCK!
Always disconnect plug from the
mains socket before cleaning the shiatsu seat
cushion. Otherwise there is a risk of electric
shock.
DANGER OF ELECTRIC SHOCK!
Do not pull the cover
2
over the
cushion until it is completely dry.
Otherwise there is a risk of electric shock.
CAUTION! DANGER OF MATE-
RIAL DAMAGE! Do not use chem-
ical cleaners or scouring agents for
Bringing into service / operation / Troubleshooting / Cleaning and Care
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SSMK 40 B2 IAN 75929 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SSMK 40 B2 IAN 75929 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info