806100
28
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
GB28
Maintenance
Trouble shooting guide
Problem Cause Correction
Upper thread
breaks 1.The machine is not threaded
correctly. 1.Rethread the machine.
2.The thread tension is too tight. 2.Reduce the thread tension (3). (lower
number)
3.The thread is too thick for the needle. 3.Use a larger needle.
4.The needle is not inserted correctly. 4.Remove and reinsert the needle. (at
side towards the back)
5.The thread has become wound
around the bobbin winder spindle (14). 5.Remove the bobbin (g) and unwind the
thread.
6.The needle is damaged. 6.Replace the needle.
Lower thread
breaks 1.The bobbin case is not inserted
correctly. 1.Remove and reinsert the bobbin case
and pull on the thread. The thread
should pull easily.
2.The bobbin case is threaded wrongly. 2.Check both bobbin (g) and bobbin case.
Skipped stitches 1.The needle is not inserted correctly. 1.Remove and reinsert needle. (at side
towards the back)
2.The needle is damaged. 2.Replace the needle.
3.The wrong size needle has been
used. 3.Choose a needle size to suit the thread
and fabric.
4.The wrong presser foot is installed. 4.Use the correct presser foot.
Needle breaks 1.The needle is damaged. 1.Replace the needle.
2.The needle is not correctly inserted. 2.Insert the needle correctly (at side
towards the back)
3.Fabric too thick/ needle size wrong. 3.Choose a needle size to suit the thread
and fabric.
4.The wrong presser foot is attached. 4.Use the correct presser foot.
Loose stitches 1.The machine is not correctly threaded. 1.Thread the machine correctly.
2.The bobbin case is not correctly
threaded. 2.Thread the bobbin case as illustrated.
3.Needle/ fabric/ thread combination is
wrong. 3.The needle size must suit the fabric and
thread.
4.Thread tension wrong. 4.Correct the thread tension.
Seams gather
or pucker 1.The needle is too thick for the fabric. 1.Use a ner needle.
2.The stitch length is wrongly adjusted. 2.Check the thread tension.
3.Fabric puckers. 3.Use a backing for ne or stretchy
fabrics.
Uneven
stitches,
uneven feed
1.The thread is too weak. 1.Use stronger thread.
2.The bobbin case is wrongly threaded. 2.Rethread the bobbin case and insert
correctly.
3.Fabric has been pulled when sewing. 3.Do not pull on the fabric. It must be
automatically moved by the machine.
The machine is
noisy 1.The machine must be lubricated. 1.Lubricate as described.
2.Fluff or oil have collected on the hook
or needle bar. 2.Clean the hook and feed dog as
described.
3.Poor quality oil has been used. 3.Only use good quality sewing machine
oil.
4.The needle is damaged. 4.Replace the needle.
The machine
jams Thread is caught in the hook. Remove the upper thread and bobbin
case, turn the handwheel (21) backwards
and forwards by hand and remove the
thread remains. Lubricate as described.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Silvercrest-SNM33C1---IAN-315501

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SNM33C1 - IAN 315501 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SNM33C1 - IAN 315501 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Silvercrest SNM33C1 - IAN 315501

Silvercrest SNM33C1 - IAN 315501 Gebruiksaanwijzing - Nederlands, Français, Dansk - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info