575484
7
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
- 5 -
Move the swivel arm
h
the final distance to
operating position 1 (see chapter "Operating
positions") and let it engage, so that the lid is
firmly seated.
Set the rotary switch
g
to the desired level.
Risk of injury from rotating parts!
NEVER reach into the mixing bowl
y
when it is in use.
Only change accessories when the drive motor
j
is at standstill! After being switched off, the drive motor
j
continues to run for a short time. The appliance
may only be used when the drive openings not
being utilised are covered with drive protection lids.
In cases of malfunction switch the appliance off and
remove the plug from the wall socket, this will avoid
an unintentional switching-on of the appliance.
Refilling with ingredients
Turn the appliance off with the rotary switch
g
.
Turn the rotary switch
g
to P and hold it firmly
until the drive motor
j
comes to a standstill
(Fig. ).
Press the unlocking button
f
down and raise
the swivel arm
h
a little.
Remove the lid.
Press the unlocking button
f
down and bring
the swivel arm
h
into operating position 5 (see
chapter "Operating positions“).
Fill with ingredients.
On task completion
Turn the appliance off with the rotary switch
g
.
Turn the rotary switch
g
to P and hold it firmly
until the drive motor
j
comes to a standstill
(Fig. ).
Press the unlocking button
f
down and raise
the swivel arm
h
a little.
Remove the lid.
Press the unlocking button
f
down and bring
the swivel arm
h
into operating position 4
(see chapter "Operating positions“).
Remove the accessories from the drive motor
j
.
Remove the mixing bowl
y
.
Clean all parts (see chapter "Cleaning and care").
Working with the food
processor
Note: Ensure that on the swivel arm
h
neither
the kneading hooks
q
, the whisk
e
nor the
mixing beater
w
are attached.
Proceed as follows to prepare the appliance for
operation with the food processor
u
:
Press the unlocking button
f
down and bring
the swivel arm
h
into operating position 4
(see chapter "Operating positions“) (Fig ).
Insert the mixing bowl
y
. The base of the mixing
bowl
y
must engage in the recesses
k
on the
appliance.
Press the unlocking button
f
down and bring
the swivel arm
h
into operating position 1
(see chapter "Operating positions“).
Remove the drive protection lid for the food
processor
u
(Fig. ).
Insert the food processor
u
into the drive opening
(The "dot" marking on the food processor
u
to
the "arrow" marking on the swivel arm
h
) and
then turn it clockwise as far as it will go (The "lock"
marking on the food processor onto the "arrow"
marking on the swivel arm
h
).
Insert the drive shaft
a
.
Depending on the task to be performed, place
the cutting
s
, rasping
o
or rubbing
i
disc
onto the drive shaft
a
of the food processor.
Place the lid with stodger
d
onto the food pro-
cessor
u
and latch it down.
Set the rotary switch
g
to the desired level.
Note: Do not press too many ingredients in the
food processor
u
. Take note of the table in the
chapter „Recommended filling quantities“.
Insert ingredients through the loading shaft with
the stodger
d
.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Silvercrest-SKM-550-A1---IAN-56433

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SKM 550 A1 - IAN 56433 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SKM 550 A1 - IAN 56433 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Silvercrest SKM 550 A1 - IAN 56433

Silvercrest SKM 550 A1 - IAN 56433 Gebruiksaanwijzing - Nederlands, Deutsch, Français - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info