694704
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
DANGER for children and people with disabilities
~ Packing materials are not children’s toys. Children must not play with the
packing material. There is a risk of suffocation.
~ This device is not designed to be used by people (including children) with
limited physical, sensory or mental capabilities or people without adequate
experience and/or understanding, unless they are supervised by someone
responsible for their safety or are instructed by them on how to use the
device.
~ Children must not play with the device.
~ Keep the device out of the reach of children.
DANGER from the battery
~ This device must not be thrown into Ƃre. DANGER OF EXPLOSION!
~ The device must not be covered while the battery is charged.
~ The device must only be charged in a dry environment.
~ The device is provided with a lithium polymer battery.
- The battery cannot be removed.
- This device must not be opened.
- Completely dispose of the device.
~ Do not expose the device to direct sunshine or heat. The ambient tempera-
ture should not be lower than |C or higher than |C. Please remember
that in a car the storage temperature may signiƂcantly exceed |C.
~ If the device is to be charged via a USB 2.0 or 3.0 computer socket, at least
one more USB 2.0 or 3.0 computer socket must be available. Unless this is
the case, the loudspeaker must not be charged.
~ The battery may only be charged with the original accessory (USB charger
cable).
Bluetooth Mini Speaker SBL 3 A1
Thank you for your trust!
Congratulations on your new Bluetooth mini speaker.
For safe handling of the device and in order to get to know the entire scope of
features:
r Thoroughly read these user instructions prior to initial use.
r Above all, observe the safety instructions!
r The device should only be used as described in these user in-
structions.
r Keep this copy of the user instructions for future reference.
r If you pass the device on to someone else, please include this
copy of the user instructions. The user instructions are a part of
the product.
We hope you enjoy your new Bluetooth mini speaker!
Notes on trademarks
The Bluetooth
®
word mark and the Bluetooth logo (
®
) are registered trade-
marks of the Bluetooth SIG Inc. (Special Interest Group), any use of the trade-
mark by the Hoyer Handel GmbH is effected within the framework of a licence.
All other names and trademarks are the property of their respective owners.
Intended purpose
This is an entertainment electronics device. The Bluetooth speaker is intended
for playing sound from audio devices via Bluetooth or using the 3.|mm jack
socket.
The device is designed for private, domestic use. This device must not be used
for commercial purposes.
Do not make any changes or carry out any repairs. The manufacturer is not li-
able for damage or malfunctions caused by improper repairs or modiƂcations.
This is the sole responsibility of the user.
Safety instructions
Warnings
If necessary, the following symbols and warnings will be used in these user
instructions:
DANGER! This symbol, in combination with the note “Danger” means
a high risk. Failure to observe this warning may result in injury to life
and limb.
WARNING! This symbol, in combination with the note “Warning”
means a moderate risk. Failure to observe this warning may result in
injury or serious material damage.
CAUTION: low risk: failure to observe this warning may result in minor injury
or material damage.
NOTE: circumstances and speciƂcs that must be observed when handling the
device.
GB
/
IE
/
MT
/
CY
WARNING! Risk of material damage
~ If you notice any irregularities (e.g. unusual noises, strange smells or smoke
developing) turn the device off immediately and remove all cables. Do not
use the device any longer.
~ If the device is moved from a cold location to a warm location, condensate
may form in the device. Leave the device switched off for a few hours to
become acclimatised.
~ Protect the device against damage, e.g. from:
- drips and splashes of water
- heat, direct sun radiation and open ƃames (e.g. candles)
- impacts and similar violent effects
~ Protect the cable against damage, e.g. from:
- sharp edges
- hot places
- clamping or crushing
~ Do not use any astringent or abrasive cleaning agents.
~ To avoid any ha\ard, do not make modiƂcations to the device. 4epairs must
be carried out by a specialist workshop or the Service Centre.
Items supplied
1 Bluetooth speaker
1 USB charger cable (Type A on micro USB)|
1 3.|mm stereo jack cable|
1 copy of the user instructions
If the delivery is incomplete or defective, please contact the responsible service
centre of the manufacturer (see “Warranty of H1;'4 Handel GmbH”).
Overview
 34 5
6
789
USB charger cable for micro
USB/Type|A
3.|mm stereo jack cable
3 Micro USB port
4 Jack socket
5 Loudspeaker
6 On/off button
|
7 Button
8 Button X
9 Button
 Pairing button
 Operating mode LED
 Charging LED
Before using the device for the Ƃrst time
r 4emove all packing material.
r 4emove the protective Ƃlm on the underside of the device.
r Check that the device is undamaged. A damaged device must never be used.
Charging
WARNING!
~ The device must not be covered while the battery is charged.
~ The device must only be charged in a dry environment.
NOTES:
r When using a USB power unit (not included in items supplied), comply with
its user instructions. The USB power unit must be able to output at least 1A
output current.
r Charge the battery fully before using the device.
r The maximum battery capacity is reached after approx. -|charging cycles.
r At a battery capacity of less than approx. 10%, an audio signal will sound
once and the charging LED

will light up red until the device automatical-
ly switches itself off.
r The charging time of an empty battery is approx.|2-2.|hours. It is possible
to play back during the charging process, however, this extends the charg-
ing time.
1. Connect the micro USB plug of the USB charger cable| to the micro USB
port|3 of the device.
2. Connect the USB-A plug of the USB charger cable| e.g. to the USB port of
a PC or to a USB power unit (not included in scope of supply). The charging
LED| is lit red and goes off when the battery is fully charged
.
Operation
Functions of the buttons
NOTE: depending on the software of the mobile device it may be that not all
functions of all mobile devices are supported. This is not a device error.
Button Function
|6
r Switching on /off: press for approx. 2 sec., a brief sound
sequence is audible.
|7
r Press brieƃy: increase the volume (audio signal at maximum
volume)
r Keep pressed: Next track
X|8
r Press brieƃy: Pause / Play
|9
r Press brieƃy: reduce the volume (audio signal sounds at
minimum volume)
r Keep pressed for 1x: Start of track
r Keep pressed for 2x: Previous track
|
r Press until a sound can be heard. The active connection is
interrupted and a new one can be built up.
LED indicators
LED indicator Function
Charging LED  is lit red Battery is being charged / or the battery
capacity is under 10%
LED  ƃashes rapidly
in white
Device sends device identiƂcation in order
to establish a Bluetooth connection (pairing)
LED  ƃashes white very
slowly
Bluetooth connection is established
LED  is lit green The plug of the 3.|mm stereo jack cable|
is plugged into the jack socket|4
(no Bluetooth function)
Establishing a Bluetooth connection
NOTES:
r The identiƂcation of the loudspeaker is “SBL|3|A1”.
r After turning it on, the loudspeaker automatically tries to reconnect to the last
paired device or to establish a new connection.
r Please observe that the establishing of the connection may vary slightly de-
pending on the audio device and the software used.
r The Bluetooth range is 10 metres.
r The loudspeaker switches off if no Bluetooth connection can be established
within 10|minutes.
r With moderate volume settings, the loudspeaker can be used for a period of
approx. 1|hours with the Bluetooth connection established.
BLUETOOTH MINI SPEAKER SBL 3 A
Operating Instructions
GB
/
IE
/
MT
/
CY
IAN: 337
ID: SBL 3 A1_18_V1.8

r If you pass the loudspeaker on to someone else, in order to protect your
data and your privacy, you should disconnect the Bluetooth connection to
the device and delete it from the connection list on your smartphone.
1. If necessary, remove the plug of the 3.|mm stereo jack cable| from the
jack socket|4.
2. Switch on the loudspeaker device using the button
|6. An audio signal
sounds. The LED|
ƃashes rapidly in
white
. The Bluetooth identiƂcation of
the device is sent.
3. Switch on the audio device (e.g. smartphone) and start the Bluetooth
connection. The audio device will now receive the device identiƂcation
“SBL|3|A1”.
. Establish a connection to the Bluetooth speaker on the audio device. Both
devices are now interconnected. The LED| on the device ƃashes slowly
in white and an audio signal sounds.
NOTE: it is possible that audio devices remember the identiƂcation of the
loudspeaker. Thus it is possible that a new connection may not be have to
be established manually while the Bluetooth function is active.
5. Now play back a music track on the audio device. The sound is played
back via the loudspeaker|5.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SBL 3A1 - IAN: 303227 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SBL 3A1 - IAN: 303227 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Silvercrest SBL 3A1 - IAN: 303227

Silvercrest SBL 3A1 - IAN: 303227 Gebruiksaanwijzing - Nederlands - 2 pagina's

Silvercrest SBL 3A1 - IAN: 303227 Gebruiksaanwijzing - Deutsch - 2 pagina's

Silvercrest SBL 3A1 - IAN: 303227 Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info